Latest News
If you would like to use our search facility - please log in or register above.
The results below are recent news items.
The results below are recent news items.
Flowmeters
Flow measurement R&D specialist TUV SUD NEL has commissioned an upgrade of its Primary Liquid Densitometer with the aim of boosting flowmeter calibration accuracy and closing the calibration traceability gap.
According to TUV SUD NEL, the new Primary Liquid Densitometer will provide the calibration traceability to primary standards for liquid density measurement at elevated temperatures, as…
Read More
Read More
Other
Applied Flow Technology (AFT) has launched a major upgrade to its Fathom modelling and analysis software, AFT Fathom.
AFT version Fathom 10 adds a number of new features to AFT’s fluid dynamic simulation software. Fathom was first created almost 25 years ago to be used by engineers for calculating pressure drop and flow distribution in liquid and low velocity gas piping and ducting…
Read More
Read More
Pumps
Pump manufacturer KSB has developed a special impeller for its Movitec multistage high-pressure pumps.
According to an announcement from the company, the new impeller ‘significantly’ improves the suction characteristics (NPSH – net positive suction head - values) of the Movitec pumps.
Apparently the pump is well suited to applications with critical inlet conditions, such as…
Read More
Read More
Other
Two major US agencies are looking to streamline the safety review and permitting process for Liquefied Natural Gas (LNG) facility proposals.
The US Department of Transportation’s Pipeline and Hazardous Materials Safety Administration (PHMSA) and the Federal Energy Regulatory Commission (FERC) have announced agreement on a Memorandum of Understanding (MOU) ‘that would refine and…
Read More
Read More
Pumps
Extending its seal-less product range, Wanner International has lunched the Hydra-Cell G66, a new positive displacement multiple diaphragm pump capable of flowrates of up to 249 litres per minute, (65.7 USgpm) at pressures up to 48 bar (700 psi).
The pumps are available with a choice of pump head materials, including brass, 316L stainless steel, ductile iron and polypropylene making them suitable…
Read More
Read More
Pumps
Side Industrie has announced the launch of the DIP Booster, a pump the company describes as designed "to accelerate flow in a gravity line". The product is designed for use in water applications.
According to Side Industrie, the DIP Booster is made of ‘high quality’ stainless steel. “They are composed of a shared hydraulic body that fits the pipe size, allowing the gravity to…
Read More
Read More
Pipelines
Colorado Springs based Applied Flow Technology (AFT) has announced the release of AFT Arrow 7, a new addition to its growing range of simulation tools.
AFT Arrow is a fluid dynamic simulation tool used to calculate pressure drop and flow distribution in gas piping and ducting systems. It can, according to AFT, be used for modelling, simulation and analysis.
Founded in 1993, AFT focuses on…
Read More
Read More
Valves
Valves Online, a UK based valve retailer, is building a new innovation centre near Plymouth.
According to a statement from the Devon headquartered, family owned company, the new facility will be built to accommodate Valves Online’s rapid expansion.
Planning consent has been secured to build the new ‘innovation centre’ on land next to the company’s existing base. The new…
Read More
Read More
Pressure control equipment specialist Oxford Flow has expanded its team with three new appointments for the US and Europe, Middle East and Africa.
According to a company announcement, the senior level hires have been made in a bid to grow Oxford Flow’s market share in the regions.
Howard Williams has been appointed as Group Business Development Director for company’s global sales across…
Read More
Read More
Pumps
The challenging conditions faced in the current oil and gas market have led to a greater focus on cost-effective, sustainable operations. Operators are faced with the extremely tough decision of whether to extend or end offshore production asset life. This has brought pre-decommissioning planning into emergence as a key challenge for the industry. Mitigating uncertainty, enabling decision making…
Read More
Read More
Pumps
Landia flowmakers – with a Lifetime Propeller Guarantee - have been supplied by Landia in North Aqaba – a city in the kingdom of Jordan that is experiencing rapid growth due to extensive construction of new hotels and resorts on its way to becoming an important tourist destination.
Situated in the far south west of the country, close to the Gulf of Aqaba and the Red Sea, the expanding…
Read More
Read More
Pipelines
A significant increase in US natural gas exports to Mexico is being capped by a slower-than-expected build out of pipelines in Mexico, according to Reuters. The news service reports that the increases in US natural gas in Mexico are far below available capacity at the border.
The latest rise in natural gas exports from the US to Mexico is apparently driven by demand from Mexico’s power…
Read More
Read More
Pumps
Swiss manufacturer Sulzer has announced the launch of a new centrifugal pump.
According to the company, its new CPE ANSI process pumps are specifically designed to ‘exceed the strictest energy regulations’ for all industries as well as the requirements of ASME B73.1.
Sulzer states that the pumps are designed to be suitable in a variety of industrial applications, including hydrocarbon…
Read More
Read More
Pumps
German pump manufacturer Netzsch will present three new products for the process industry at the Achema exhibition in Frankfurt, Germany, 11th to 15th June.
Aiming to supply pumps for the chemical, paper and pulp production, ceramics, paints and varnishes industries, Netzsch regularly expands it product range according to the “full service in place idea”.
With so many media, such as…
Read More
Read More
Pumps
ARO, a brand of Ingersoll Rand, will showcase a variety of pumping solutions, ranging from air operated double diaphragm pumps to piston pumps, and filters, regulators and lubricators, at the Achema show in Frankfurt, Germany. The event runs from 11th – 15th June.
The company will present its line of Exp Series pumps, which are ‘process and automation ready.’ ARO says that the…
Read More
Read More
Valves
Protego will be showcasing its new Type VN-A-PC pilot-controlled diaphragm valve at the upcoming Achema event in Frankfurt, Germany, 11 – 15 June.
According to the Germany headquartered company, the valve is designed for liquefied gases under cryogenic conditions up to -200°C. The valve has been newly developed for pressure and vacuum relief.
Primarily used as a safety device for…
Read More
Read More
Pumps
Grundfos has launched a new area of its Ecademy specifically aimed at professionals who work in the water and wastewater sectors.
The Ecademy is described by Grundfos as a learning tool for engineering professionals. It is a free online training platform designed to keep its users up-to-date on the latest developments within the pump industry. The platform already has topic sections for…
Read More
Read More
Pumps
Twin screw pump technology specialist ITT Bornemann has announced the launch of the SLW, which it describes a “hermetically-sealed” pump.
ITT Bornemann unveiled the product via a Facebook Live broadcast during the Achema exhibition in Frankfurt, Germany.
The SLW pump is designed to add to the company’s extensive portfolio of industrial pumps for customers in the chemical, oil…
Read More
Read More
CONNECT WITH US
Latest Video
Catalyst for Change: Sustainable and Efficient Flow Control for the Chemical Industry
Energy #infrastructure company @enagas has signed an agreement with @Orbital_Eye to deploy satellite-powered monitoring across its entire gas pipeline network in #Spain.
https://fluidhandlingmag.com/news/orbital-eye-becomes-enagas-service-provider-for-satellite-monitoring-of-critical-pipeline-infrastructure/
#fluidhandling #oilandgas #pipelines #technology #monitoring
@Armstrong_Industrial has formalised a strategic partnership with @Hystar to deliver integrated and modular hydrogen production plants ranging from 1 MW to 20 MW with larger options available.
https://fluidhandlingmag.com/news/armstrong-industrial-partners-with-hystar-to-deliver-hydrogen-installations/
#fluidhandling #pumps #pipelines #valves
#Kent has been awarded a contract by MorGen Energy to deliver Engineering, Procurement and Construction Management (EPCm) services for their West #Wales 20MW green #hydrogen #plant located at Milford Haven.
https://fluidhandlingmag.com/news/kent-awarded-contract-for-welsh-green-hydrogen-plant/
#fluidhandling #pumps #pipelines