Archive News
Pumps
Warning: Attempt to read property "ID" on false in /var/www/vhosts/fluidhandlingmag.com/public_html/wp-content/themes/woodcote-magazines/page-news_feed.php on line 69
Pumps
A Landia chopper pump has proved a godsend at the Twin Cities Rescue Mission (TCRM) in Marysville, California.
Plagued by a sewage pump that constantly plugged up and broke down, TCRM, established in 1956 to provide food and shelter to those in need, finally had to bring in porta potties when the pump burned out completely.
Relying on financial or food donations only, with no government funding…
Read More »
Read More »
Pumps
KSB, a German pump manufacturer, is introducing the PumpDrive variable speed system and its three new functions, which have been especially created for operating wastewater pumps.
For a complete water column to be established during start-up, PumpDrive ramps the pump up to maximum speed within four seconds.
The speed is maintained for three minutes so that an appropriate flow passes through all…
Read More »
Read More »
Pumps
The Las Vegas Street wastewater treatment plant in Colorado Springs, US, dates back to the early part of the 20th Century.
In the early 1980s, the city needed to expand the plant and investigated ways to transport primary sludge across town to its Hannah Ranch, now Clear Springs facility 18 miles away for further processing.
Brown & Caldwell, a US engineering solutions company, recommended…
Read More »
Read More »
Pumps
The Hansa-TMP Mechatronics Research Centre, based in Modena, Italy, in collaboration with the Engineering Department of the University of Modena and Reggio Emilia, has developed the TPV 3600 axial piston pump series.
The TPV 3600 pump is modular in all its parts, and shares the same body between all pumps in the model range.
In order to improve the efficiency and the performance of the system,…
Read More »
Read More »
Pumps
Centrifugal pumps designer and manufacturer Amarinth has been awarded an order to supply high-quality, bespoke API 610 VS4 vertical pumps to Cannon Bono Artes for use by ADCO in the Middle East.
The pumps will delivered as part of a produced oily water separator treatment package destined for the ADCO Rumaitha and Shanayel Phase 3 enhanced oil recovery project.
Rumaitha and Shanayel form part of…
Read More »
Read More »
Pumps
Industrial and mining pumps specialist Global Pumps has released the new Mag Drive High Head Series from Techniflo to meet the needs of businesses and individuals requiring efficient pumps in their processes.
Designed and manufactured by Techniflo, the Mag Drive High Head Series pumps have a leak-free design to address the application demands of industries processing caustic or acidic…
Read More »
Read More »
Pumps
KSB Aktiengesellschaft, a German pumps manufacturer, has released the youngest generation of its Amarex KRT submersible motor pumps for the first time in Germany.
The pump type is used for handling all kinds of municipal and industrial wastewater at a maximum flow rate is 10,080m3/h and a head of 120m.
With 850kW, it offers the highest motor power available on the market as standard, according to…
Read More »
Read More »
Pumps
Graco, a manufacturer of fluid handling equipment, has introduced the ToughTek portable stucco pump for stucco and exterior insulation and finish system (EIFS) materials
The pump is the newest addition to Graco’s ToughTek product line of compact and portable pumps that use piston pump technology to deliver abrasive materials with a smooth, steady flow.
“These new ToughTek stucco…
Read More »
Read More »
Pumps
Sundyne, a designer and manufacturer of centrifugal seal-less magnetic drive pumps, has supplied its HMD/Kontro API 685-compliant pumps to a major Malaysian refinery currently upgrading equipment throughout its facility.
As refining and petrochemical processing operators around the world face increasing pressure to comply with stringent health and safety regulations, they are replacing…
Read More »
Read More »
Pumps
German pump manufacturer Wangen Pumpen has added the Wangen Xpress series to its portfolio of progressing cavity pumps specifically designed for easy maintenance and operational safety.
The new series of pumps targets companies specialising in wastewater treatment, biogas production, and industrial plants that convey highly viscous fluids and abrasive sludge and require a speedy maintenance of…
Read More »
Read More »
Pumps
Power management company Eaton has launched new high-performance DWF duplex lubrication oil filters to help preserve hydraulic pumps, motors, bearings and gears.
The DWF series of filters feature a three-way changeover ball valve so that when service is required on one side, the filtration flow is easily switched to the other chamber.
The new PTFE sealing system on the switchgear ensures easier…
Read More »
Read More »
Pumps
The horizontally installed compact Miniflux container pump by German manufacturer Flux has been approved for use in explosion hazard areas (Zone 1).
The pump was designed for draining IBCs via their floor-level outlet and is an alternative to vertical immersion pumps.
When accessing IBCs from above is impossible or very difficult, such as when containers are stacked or ceilings are low, the…
Read More »
Read More »
Pumps
Sulzer has introduced a new efficient submersible recirculation pump type ABS XRCP 800 PA with a completely new design.
The new pump series is developed for the pumping and recirculation of activated sludge in wastewater treatment plants during the nitrification and denitrification process, as well as for the pumping of storm, surface, and river water.
It complements the submersible recirculation…
Read More »
Read More »
Pumps
Spice pastes, sauces or marinades – in liquid form or as paste-like preparations – often contain shredded ingredients such as herbs or vegetable pieces and even grains of salt.
When mixed with the liquid product, these solid ingredients, the grains in particular, represent a special challenge for the hygienic filling process.
The dosing components used must withstand high stress due…
Read More »
Read More »
Pumps
AxFlow has extended its range of positive displacement pumps with the introduction of the LB suite of elastomer-coated rotary lobe pumps for flows of between 5 to 130m³/hr.
The LB pump has been designed from scratch following an assessment of products currently on the market with a view to producing a process quality pump, positioned above the more agricultural designs yet without attracting…
Read More »
Read More »
Pumps
Borger has supplied a turnkey pump and macerator installation package to a leading international hotel group at one of the company’s key locations in the West Midlands, UK.
To suit a maximum flow of 25m3/h, a classic 3.0kW maintenance-in-place Borger PL200 pump has been introduced to handle raw sewage at the busy hotel, replacing an unreliable unit that was also difficult to service.
The…
Read More »
Read More »
Pumps
Edwards is unveiling new vacuum pumps at the Analytica expo at Munich, which are aimed at the analytical instrument and R&D markets.
The new nEXT85 turbomolecular pump builds upon the EXT75DX model by offering a pump with improved performance in a smaller package, while maintaining the same high levels of reliability.
The nEXT85 will also deliver the operational and service benefits of the…
Read More »
Read More »
Pumps
PSG, a Dover company and a pumps and flow control solutions manufacturer, has designed new models of its Abaque Series peristaltic hose pumps specifically for the mining industry
The new models include a stronger and more durable rotor design and patented hose holding system to manage the challenging requirements of mining applications.
Featuring a seal-less design that eliminates leaks and…
Read More »
Read More »
CONNECT WITH US
Latest Video
Catalyst for Change: Sustainable and Efficient Flow Control for the Chemical Industry
Expressions of interest (EoI) are being sought by leading research organisation @UK_WIR for expert #partners ready to carry out targeted research projects to tackle critical #water #industry #problems.
https://fluidhandlingmag.com/news/latest-ukwir-projects-available-for-expression-of-interest/
#fluidhandling #pumps #pipelines #valves #technology
For an expanding #pig business in #Yorkshire that needed to meet environmental permitting regulations, A-Consult has completed the installation of a new 2200 m3 concrete slurry tank, together with a pump and mixer, installed by @Landia.
https://fluidhandlingmag.com/news/new-pig-slurry-store-with-pump-and-mixer-works-wonders-for-farmers-crops/
#fluidhandling
#Dŵr Cymru Welsh Water (DCWW) has signed a three-year #agreement with industrial artificial intelligence (AI) specialist Samotics for the on-going predictive condition monitoring of critical #wastewater assets across its estate.
#fluidhandling #pumps