Archive News
Pumps
Pumps
Portable pump equipment manufacturer BBA Pumps has introduced a bolt-on pump package for offshore applications.
The BA-C250H45 bolt-on pump package is designed to cater to the mining and offshore markets, where there is no need for a complete skid and/or canopy.
These units feature the customer's BA-C pump of choice coupled to a diesel engine, including the control panel, and mounted on a high…
Read More »
Read More »
Pumps
Graco, a manufacturer of fluid handling equipment, has unveiled its electric supply pump for high pressure applications.
The E-Flo DC pump features an energy efficient electric brushless DC motor that stalls under pressure and changes speeds to maintain constant fluid pressure, similar to a pneumatic air motor.
Suited for high-pressure applications such as waterborne spraying or moving high…
Read More »
Read More »
Pumps
Verder has introduced the Verderair Hi-Clean range of air operated double diaphragm pumps. The Hi-Clean range is suitable for where pumping processes require FDA, 3A and EC1935/2005 compliant specification.
The pumps are constructed from SS316 stainless steel polished to RA 3,2μm. The centre section is also available in aluminium and PP for where a full SS316 is not required.
The range also…
Read More »
Read More »
Pumps
Following a successful launch in the French market, Weir Minerals has launched the WEMCO range of extra-heavy-duty vortex pumps throughout Europe – the first time they have been available across the continent in 60 years.
The pumps are designed to handle large and abrasive solids and corrosive fluids using vortex technology. A recessed impeller allows solids to pass through the pipe easily,…
Read More »
Read More »
Pumps
Germany-based KSB Aktiengesellschaft has launched a fully automatic submersible pump for all rainwater harvesting and pressure boosting applications.
Fitted with an integrated pressure switch, flow sensor and lift check valve, the Ixo-Pro set requires neither an automatic control unit nor a pressure vessel.
If a tap is opened, for example, the pressure in the system decreases and Ixo-Pro is…
Read More »
Read More »
Pumps
Cat Pumps has announced the development of a new version of its field-proven 5CP positive displacement triplex plunger pump series.
The new 5CP4120 series meets increasing demands for higher pressures in the heavy-duty high-end pressure washer market.
'We have extended the pressure range from 3,500 to 4,000 psi (245 to 275 bar),' says Brian Hubbard, GM of Cat Pumps UK. 'Our new 5CP4120 is a…
Read More »
Read More »
Pumps
Magnetic drive pumps offer high levels of liquid and vapour containment and are an effective solution for a great many challenging applications, in particular handing liquefied gases.
Such applications are now being addressed by AxFlow with its Aturia SDTM pump range.
The Aturia range of SDTM magnetic drive multistage centrifugal and turbine process pumps has been developed specifically for…
Read More »
Read More »
Pumps
A new range of dosing pumps launched by NOV Mono offers an efficient, reliable and low maintenance solution for applications where low flow, accurate dosing is required.
The MonoTM dosing pump provides a smooth pumping action with no pulsation and very low shear. The pump is ideal for either intermittent or continuous dosing duties in high pressure, low flow applications. It represents a…
Read More »
Read More »
Pumps
A new compact pump from Cole-Parmer designed for low flow fluid transfer has been created for transferring, sampling or filling applications in laboratories and research settings.
Masterflex L/S compact pumps with Miniflex pump head is a complete system which includes a pump head and drive.
Operating with continuous tubing to eliminate leakage, providing a cleaner fluid path, the new peristaltic…
Read More »
Read More »
Pumps
A new range of pumps from Techniflo designed to withstand the challenges of pumping sulphuric acid in various applications has been introduced by Australia-based distributor Global Pumps.
The TB-mag series pumps are designed to aid the pumping of sulphuric acid up to 120⁰C and 98% concentrated.
Sulphuric acid is used in applications from processing ore and refining oil to manufacturing…
Read More »
Read More »
Pumps
Pump manufacturer Edwards has unveiled a new range of single stage oil sealed rotary vane vacuum pumps for use in a range of industrial and scientific applications.
The pump mechanism on the new ES pump has been refined to produce a high quality, stable vacuum, and the company says the optimised oil return system means there are no pressure fluctuations often seen in single stage pumps.
Developed…
Read More »
Read More »
Pumps
Verderflex has extended its range of Dura peristaltic pumps with two new additions to the line.
The new 5mm and 7mm high pressure low volume hose dosing models are designed to handle less than 1 l/hr at 5 or 8 bar with a reinforced hose. The range, designed to handle slurry and sludge-like fluids such as those found in wastewater treatment, now has dosing/transfer rates of up to 12 m3…
Read More »
Read More »
Pumps
CDR Pumps has launched the new UCL and UCL-B (close coupled version) range of pumps.
The range supersedes the UCN-L and UCN-BL range, which has been utilised for years in the chemical and pharmaceutical industry.
The unit is an ISO5199 pump available in material including polypropylene-lined, PVDF-lined or PFA-lined for the harshest of duties. The unit offers impeller options such as closed for…
Read More »
Read More »
Pumps
Cat Pumps has introduced a new positive displacement triplex plunger pump to meet the demands of Very High Pressure (VHP) systems.
Delivering pressures up to 690 bar (10,000psi), the compact Model 6810 is a 68-frame, block style 10K stainless steel plunger pump producing up to 38l/min of consistent flow. Unlike air-driven pumps, Cat Pumps triplex PD pumps provide predictable, high flow rates…
Read More »
Read More »
Pumps
PT Hydraulics Australia has added a new pump series for use in harsh environments to its range.
The Dynex PF500 Series pumps are designed for use in remote locations around the world. Featuring individual piston check valves with positive sealing action to provide contamination tolerance and greater volumetric efficiency at pressures to 10,000psi (700 bar).
Dynex panel system pumps have a low…
Read More »
Read More »
Pumps
Crane ChemPharma & Energy has announced the launch of a new line of pumps for use in industrial applications worldwide.
The design of the DEPA DH Next Generation Aluminium Housing Air Operated Diaphragm Pump offers numerous benefits to users, the company says, including:• Flexible Multi-port Connections: A customized manifold design improves ball valve guidance, increases functionality…
Read More »
Read More »
Pumps
Flowserve, a provider of flow control products and services for the global infrastructure markets, has announced the opening of its state-of-the-art pump manufacturing plant in Coimbatore, India.
The facility will support the company's existing Indian operations and provide pump products for power and oil and gas industries throughout the Asia Pacific region.
The new expansion includes…
Read More »
Read More »
Pumps
When pumping applications present the challenges of low flows at high pressures, very low NPSH for high temperatures or low vapour pressure liquids, a new pump range from Pump Engineering could be an ideal tool for efficiency.
The MTH range of pumps is designed for applications such as boiler feed, high pressure cooling, refrigeration and CIP process. These compact pumps, which are available in…
Read More »
Read More »
CONNECT WITH US
Latest Video
Catalyst for Change: Sustainable and Efficient Flow Control for the Chemical Industry
