Oct 26, 2015
Energy Recovery signs VorTeq exclusivity deal with Schlumberger
Archive News
Oct 23, 2015
Valves
Aberdeen, Scotland-based EnerMech has invested ZAR 5.3 million (£250,000) to provide a door-to-door valves service for South Africa’s industrial services and energy industries.
The international mechanical engineering group has equipped two mobile PSV valves testing rigs capable of delivering valve certification and servicing within a 2,000km radius of Cape... [Read More]
Archive News
Oct 22, 2015
Other
Reducing energy consumption is just one part of an industrial company's energy management strategy, as it must also source or generate its energy competitively, while taking account of CSI and green initiatives which may affect the energy mix.
This situation opens up the requirement for a solution that can make complex purchasing and management decisions far easier.
For... [Read More]
Archive News
Oct 21, 2015
Other
KSB Aktiengesellschaft, a German pumps and valves manufacturer, will present a new kind of low-speed submersible mixer for use in waste water treatment and biogas production.
The new Amaprop 1380 can serve as a back-up mixer, scum breaker, or flow accelerator and it can be used alone or in combination with larger mixers.
The new mixer for biogas plants has... [Read More]
Archive News
Oct 21, 2015
Pumps
Netzsch Pumpen & Systeme has expanded its range of progressing cavity pumps and rotary lobe pumps with a three-model series of compact screw pumps, the Notos two-, three-, and four-spindle models.
Depending on the type, they are suitable for non-lubricating substances at high pressures up to 80 bar and temperatures up to 300°C.
They thereby cover a wide range of... [Read More]
Archive News
Oct 20, 2015
Other
Increasing energy efficiency through the adoption of readily available wastewater management technologies can slash related emissions by nearly half, according to a new study released today by Xylem, a global water technology company.
The analysis further concludes that 95% of the electricity-related emissions abatement can be achieved at negative or neutral cost.
Powering... [Read More]
Archive News
Oct 20, 2015
Pumps
Amarinth, a global centrifugal pump and associated equipment provider to the oil and gas, petrochemical, chemical, industrial, and renewable energy markets, has secured a $1.5 million (€1.3 million) order from Petrofac for 12 API 610 OH2 super duplex pumps with Plan 53B seal support systems.
The products will be delivered to a produced water treatment plant that will... [Read More]
Archive News
Oct 19, 2015
Pumps
The Swiss pump manufacturer CP Pumpen has released a new magnetic drive pump, the MKP 250-200-315, bringing the MKP series to larger volume pumping applications.
‘The demand for pumps with a large flow volume has increased in the past. With a volume of up to 750m3/h, the new MKP is complementing our series with a size that is important for the market,’ says... [Read More]
Archive News
Oct 16, 2015
Pumps
German pump manufacturer Börger has introduced the new Onixline pump range for high pressure applications.
Designed with flow-simulation software, the Onixline range can handle demanding high pressures up to 16 bar in applications including waste, chemical, oil, offshore, paper/pulp, and sugar.
Available with interchangeable cartridge seals to suit application-specific... [Read More]
Archive News
Oct 16, 2015
Pumps
Hansa-TMP, an Italian hydraulics company, has released the TPV 1500 variable displacement closed loop axial piston pump, developed at the company’s new Mechatronics Research Centre.
The TPV 1500 series pumps feature displacement of 17-21cm3/n and a peak pressure of 400 bar, making one of the top performers in its categoty, Hansa-TMP says.
The high pressure and displacement... [Read More]
Archive News
Oct 15, 2015
Flowmeters
Fluidwell, a Dutch liquid management instrumentation provider, has launched its E-series of explosion-proof flow computers.
This range of explosion-proof indicators, totalizers, and monitoring systems are designed to be used in harsh and difficult hazardous area applications.
Eric Rath, general manager of Fluidwell in Netherlands, says the E-series is distinguished by... [Read More]
Archive News
Oct 15, 2015
Other
Minnesota Rubber and Plastics (MRB) has introduced Quniton, a new family of permanent, highly lubricious materials.
Quniton was developed to meet a market need for a high-performance lubricious product with permanent, low coefficient of friction (CoF) surface properties.
The material is suitable for a variety of applications in markets such as water, power, transportation,... [Read More]
Archive News
Oct 14, 2015
Valves
AS-Schneider, an industrial valve specialist, has developed a customised manifold for the crude oil industry based on its VariAS range.
The VariAS-Block is equipped with a swivelling adapter, which enables the position of the whole pressure hook-up to be flexibly varied, making the valves and pressure gauge easily accessible.
The measuring instrument is mounted directly... [Read More]
Archive News
Oct 13, 2015
Other
In many industries, such as food and beverage and pharmaceuticals, it is essential that all equipment is able to satisfy the most stringent cleanliness requirements.
Advantech has released a new fully sealed IP69K-rated stainless steel multi-touch panel PC for use in such applications.
The new 21.5” widescreen IPPC-5211WS touch-panel computer is the latest model... [Read More]
Archive News
Oct 13, 2015
Other
Indeck Power Equipment has redesigned its 75,000pph superheat watertube boilers to save in fuel costs and provide higher efficiency while improving operations.
Many heavy processing industries like petroleum, chemical, food, and pulp/paper rely on superheated steam to accomplish their production.
The 75,000pph superheat 'O' type boilers are constructed in accordance with... [Read More]
Archive News
Oct 12, 2015
Other
Inpro/Seal, a US-based bearing protection and shaft seal solutions provider, has updated and expanded its portfolio of shaft grounding solutions to meet the growing need for protection against electrical discharge machining (EDM).
Smart shaft grounding (SSG) from Inpro/Seal combines proven current diverter ring (CDR) technology with new features to increase reliability... [Read More]
Archive News
Oct 9, 2015
Pumps
At the end of August 2015, KSB Pumps India won a substantial order for the supply of six boiler feed pumps to be installed in the new, ultra-modern fossil-fuelled power station located in Tanda in the Indian state of Uttar Pradesh.
India’s national power utility is currently building two new power plant units in Tanda, each with a capacity of 600MW.
The pumps are... [Read More]
CONNECT WITH US
A major milestone has been reached on the £50 million (€57 million) upgrade of #Southport #Wastewater #Treatment #Works in the #UK, with construction of the new stormwater storage tank now well underway.
https://fluidhandlingmag.com/news/stormwater-tank-progress-marks-key-stage-in-upgrade/
#fluidhandling #pumps #pipelines
@Armstrong_Fluid_Technology has introduced the SE-FMS, a new modular solution designed to bring greater intelligence, flexibility and efficiency to HVAC fluid management.
https://fluidhandlingmag.com/news/armstrong-launches-modular-se-fms-for-smarter-hvac-fluid-management/
#fluidhandling #pumps #valves #technology #success
#Packo has expanded its hygienic #centrifugal #pump portfolio with the launch of the MFP3/125-315, a new model designed to minimise total cost of ownership across demanding fluid handling applications.
https://fluidhandlingmag.com/news/packo-launches-mfp3-125-315-pump-focused-on-low-lifetime-costs/
#fluidhandling #technology #success
