News
Pumps
Merck Millipore, the Life Science division of Merck, has launched a new range of pumps for sterility testing of pharmaceutical products in laminar flow hoods, isolators and clean rooms.
Steritest Symbio Pumps were developed to address stringent pharmaceutical testing requirements.
'The Steritest Symbio Pumps are the newest addition to our comprehensive portfolio of innovative and reliable…
Read More »
Read More »
Level Monitors
Krohne, a specialist in measuring systems for process industries, has introduced a new 10 GHz FMCW radar level meter for liquid applications in up to a 30m (98ft) measuring range.
The Optiwave 5200 C/F, a 2-wire loop powered device, measures level and volume in storage or process tanks with process conditions up to 250°C and pressures up to 40 bar (580 psi) for general purpose or hazardous…
Read More »
Read More »
Other
Operators at remote liquefied natural gas (LNG) production sites who rely on portable or skid mount vaporiser production equipment will find General Monitors provides comprehensive gas and flame monitoring to prevent accidental explosions and fires.
General Monitors' S4000CH Combustible Gas Detector provides thorough, continuous monitoring of combustible gases via its robust catalytic bead…
Read More »
Read More »
Valves
Valvestock, the specialist valve and actuator arm of Pipe Center, has introduced a new rapid response service for plastic valves and actuator packages aimed at installers, skid builders and end users.
It provides dedicated technical support for the selection, quotation and next-day delivery of plastic valve automation and actuation products.
The rapid response service, which sees assembly take…
Read More »
Read More »
Valves
Valve and actuator specialist Bonomi North America's new 'true' wafer stainless steel full-port ball valves are designed to be a flow-enhancing alternative to high-performance butterfly valves in OEM applications, skid-mounted systems or any tightly-confined area.
Designed for use in ANSI Class 150 flange applications, the new Valpres 725000 Series can reduce space, cost and weight in any…
Read More »
Read More »
Valves
Metso has successfully delivered more than 70 Neles globe valves for Phase II of the Longyu Coal project in Henan Province, China.
The valves have been installed and their operation in extreme conditions has reportedly been ‘flawless’, helping to lower operating costs and minimising the need for valve spare parts and other accessories. This, in turn, means a lower total cost of…
Read More »
Read More »
Flowmeters
Capable of operating up to 110°C, the high temperature Atrato ultrasonic flowmeter from Titan Enterprises is purpose designed for applications requiring precise flow measurement at elevated temperatures.
The Atrato is an inline non-invasive flowmeter without the contorted flow path and disadvantages of alternative ultrasonic designs. It can handle flows from laminar to turbulent and is…
Read More »
Read More »
Other
GP:50, an AS9100C and ISO9001 certified manufacturer of pressure sensing instrumentation, has announced the introduction of its Model 216/316 Series, a family of compact, long range, high line differential pressure transducers.
The GP:50 Model 216/316 Series is available in pressure ranges from 2.5" WCD thru 200 PSID (14 bar), with line pressure options up to 5000 PSI (345 bar). The Model 216 is…
Read More »
Read More »
Other
AxFlow has announced that it has taken on the exclusive distribution of APV heat exchangers for industrial markets in the UK. APV heat transfer solution for cooling, heating, condensing and evaporation of process fluids are used across a wide range of industries and AxFlow now becomes the prime source of distribution to the chemical, industrial, oil and gas and power sectors throughout the…
Read More »
Read More »
Level Monitors
In response to demand, BTE has developed a new type suction line level indicator system.
The new device mounted on the top corner of a tank can send a signal to a PLC controller in the Control Room to show the operating level of the floating suction arm. The system is an adaptation of the BTE mechanical indicator system employed to date.
BTE is a specialist in the provision of small to large…
Read More »
Read More »
Valves
Metso has been selected to supply state-of-the-art flow control technology to the Petronas Gas Berhad's gas processing plant modernisation project in Kerteh, Terengganu, Malaysia.
The new flow control solutions will replace the plant's existing equipment and enable the plant to reach a higher safety integrity level while improving its environmental performance. The order includes over 140…
Read More »
Read More »
Valves
Hardide Coatings, a provider of advanced tungsten carbide-based coatings, has played a key role in the development of new ball valves manufactured by Heap & Partners, a UK-based manufacturer of fluid handling equipment.
The valve specialist has developed its own range of 'Phase' trunnion-mounted ball valves for the UK energy sector, and the Hardide-T coating was selected, particularly for the…
Read More »
Read More »
Valves
Pentair Valves & Controls has supplied its largest ever bolted bonnet flanged wedge gate valves for an integrated petrochemical plant located in the Middle East.
Engineered and manufactured under the Fasani brand, the specialist carbon steel bodied valves measure 78 and 84" in diameter with ANSI class 150 pressure rating.
Designed for wet flare line applications within the plant, the Pentair…
Read More »
Read More »
Valves
Czech valve manufacturer MSA, a member of Rimera group, will provide its production to construction project of the third and the fourth block of the Tianwan nuclear power plant, Jiangsu province.
The specially-designed ball valves will be manufactured from November 2014 to May 2015 for Atomstrojexport. The valve medium is sea water that is pumped in the beginning of the nuclear plant operational…
Read More »
Read More »
Other
LinkTech Quick Couplings has launched 50PP Series couplings, offering greater chemical resistance along with a more robust thumb-latch technology for greater durability on containment tank walls and drums.
The quick coupling solutions can provide more durability and withstand harsh chemicals.
LinkTech's new 50PP Series were designed with an improved robust thumb-latch. This feature helps create…
Read More »
Read More »
Other
NOV Mono has secured a major industry certification for its Pressure Sewer System (PSS).
Mono's InviziQ system has been awarded the certification by the Water Services Association of Australia (WSAA) making Mono the only PSS manufacturer in Australia to receive this recognition. The WSAA certification is awarded for various criteria, including meeting WSAA standards, technical compliances,…
Read More »
Read More »
Level Monitors
The Aqua XL and the Aqua Medium from ATMI are robust float level switches constructed with an internal ballast.
The microswitch inside these float switches tilts as the liquid level rises, closing or opening an electrical circuit.
Thanks to its volume and weight, the switches are able to penetrate the grease layers found on wastewater pumping stations.
They are ideal for applications in all kinds…
Read More »
Read More »
Flowmeters
Tricor Coriolis Technology has announced the release of a new 3" Coriolis flowmeter to add to its TCM series.
This meter is particularly well-suited to the oil & gas industry in applications such as measuring the midstream transportation of oil & gas, rail car & truck loading, allocation metering in crude oil and natural gas production, and metering of refined products in downstream…
Read More »
Read More »
CONNECT WITH US
Latest Video
Catalyst for Change: Sustainable and Efficient Flow Control for the Chemical Industry
Andy Burnham, the former editor of @BulkDistributor magazine which forms part of the @FluidHandIntl stable of publications, has been formally sworn in as the new Prime Minister of the United Kingdom.
https://fluidhandlingmag.com/news/ex-editor-andy-burnham-sworn-in-as-new-uk-prime-minister-after-starmer-steps-down/
#fluidhandling #PM #AndyBurnham
#Kent has announced its continued support of #OXEA Corporation through a long-term Engineering Services Agreement and the award of detailed engineering services for a major specialty chemicals project at OXEA’s Bay City facility.
https://fluidhandlingmag.com/news/kent-awarded-epcm-services-for-major-oxea-specialty-chemicals-project/
#fluidhandling #pumps
@Hydrolevel_Company, a leading manufacturer of temperature and liquid level controls, has highlighted its Steam Pro Kit, a low water cut-off kit designed specifically for steam boiler gauge glass attachments.
https://fluidhandlingmag.com/news/hydrolevel-highlights-steam-pro-kit-for-upgrading-mechanical-low-water-cut-offs/
#fluidhandling #technology #water #systems