News
Valves
New York-based manufacturer Griffco Valve has earned certification for CE under the Pressure Equipment Directive (PED) 97/23/EC Category 4, Modules B and D for its design and manufacture of pressure relief/safety valves and back pressure valves.
Griffco is one of the first diaphragm pressure relief valves certified to this level of CE marking. The company says that this will allow customers to…
Read More »
Read More »
Valves
Now available from Rotork Instruments is a hazardous area limit switchbox for manual valves designed with minimal moving parts and magnetic switching technology for long-term reliability in the most demanding applications and hostile environments.
Available with a rugged polyester powder coated copper-free aluminium or 316L stainless steel housing, the Soldo Easy Switch design is adaptable to…
Read More »
Read More »
Other
Minco, a global provider of thermal, temperature sensing and control, and flex circuit solutions for high-reliability applications, has announced new pressure sensing capabilities with the addition of the P8211, P8271, and P8281 Series pressure sensors.
Designed for pressure measurement in gases, vapours or liquids, these pressure sensor lines provide accurate, repeatable and durable pressure…
Read More »
Read More »
Pumps
The Kurt J. Lesker Company (KJLC) has introduced a new line of rotary vane vacuum pumps for a range of applications.
Made up of two-stage oil sealed rotary vane vacuum pumps, the KJLC-RV series is designed to combine high pumping speed with low noise/ vibration levels and 'superior vapour handling capabilities'.
Comprising four models with pumping speeds ranging from 3.8 to 22.9 CFM, each pump in…
Read More »
Read More »
Other
Accelerate H2O, a Texas-based organisation created to discover, promote and invest in new and existing technologies that have potential to fill demands and needs in the state's $9 billion (€7.9 billion) water technology market, has entered into a partnership with Isle Inc., an independent technology and innovation consultancy specialising in clean technologies. Under the agreement,…
Read More »
Read More »
Pumps
Pump specialist FLUX-GERÄTE has launched a new bearing flange with integrated impulse generator for its eccentric worm-drive pumps. This allows indirect volume measurement to be taken without contact with the material, e.g. for use in the pharmaceuticals, food and cosmetics sectors.
The mechanical-volumetric process with impulse generator provides indirect flow-rate measurement. For this…
Read More »
Read More »
Valves
Rotork has announced an extensive advancement of CMA electric actuation technology for the operation of process control valves, introducing new options to meet evolving customer and market requirements. With the latest developments, the CMA design can now be specified with increased functionality encompassing local controls, LCD positional display and programmable fail-to-position…
Read More »
Read More »
Pumps
Grundfos has introduced a line of integrated pump motors, drives and control ideals for new commercial HVAC/R applications and retrofits.
LCSE split-coupled end suction pumps with integrated motor, drive and control feature the MLE variable speed motor in ranges from 3 to 30 horsepower (HP) in 3,500 revolutions per minute (RPM) and 3 to 25HP in 1,800 RPM. Available in 21 different models, the…
Read More »
Read More »
Pumps
Mouvex, part of PSG, a Dover company and a manufacturer of positive displacement pumps, will be displaying various models of its eccentric disc pump technologies in hall 8, stand D37 at the upcoming ACHEMA 2015 show, June 15-19 in Frankfurt am Main, Germany.
Specifically, the features and benefits of Mouvex pumps will be highlighted as they relate to enhancing product recovery capabilities in…
Read More »
Read More »
Pumps
China, one the world's largest manufacturers of electronics and the largest consumer of semiconductor products, accounts for about 40% of global consumption. Many of the leading international semiconductor companies have transferred there production to China, making the country a key link in the international industrial chain. In 2014, sales growth in the IC (Integrated Circuit) industry was…
Read More »
Read More »
Valves
Ham-Let, a global manufacturer of instrumentation valves and fittings for industrial and high purity fluid and gas delivery systems recently launched its ultra-fast (UF series) diaphragm valve for atomic layer deposition.
'Our UF series unique flow adjustment mechanism, patent pending no. US 61/910, 79, allows for precise flow adjustment and stable flow capacity during rapid high cycle…
Read More »
Read More »
Pumps
Flowserve, a provider of flow control products and services for the global infrastructure markets, has signed a license agreement with New Way Air Bearings to develop externally pressurised solutions for its seal and pump operations.
By adapting New Way's technology through Flowserve's application experience in fluid motion control, a new generation of rotating equipment becomes possible. With…
Read More »
Read More »
Flowmeters
Titan Enterprises has built an ultrasonic water meter technology demonstrator using its Atrato flowmeter as a platform. The new device meets all the required water industry performance standards and fits within the 110mm desirable mounting length.
The world domestic water meter market is estimated to reach over 30 million units this year. The majority of these will be 'smart' meters requiring…
Read More »
Read More »
Other
Swiss sensor manufacturer Innovative Sensor Technology (IST) has acquired Freiburg im Breisgau-based Jobst Technologies with a view to strengthen its position in the market for bio and chemical sensors.
Jobst Technologies' product portfolio encompasses chemical sensors for methanol, ethanol, and oxygen, biosensors for glucose and lactate, microfluidic systems such as static micromixers, complete…
Read More »
Read More »
Flowmeters
Aquaflow, a division of T-T Pumps, recently introduced a range of new liquid turbine flowmeters for demanding applications.
The Acuflux's durability is demonstrated in its temperate range, allowing a flow of liquid from -40°C to +85°C and a 40 bar maximum working pressure. The flowmeter incorporates a two line LCD display indicating flow rate, volume and cumulative totals for clear data…
Read More »
Read More »
Other
Electronics manufacturer Contrec, has launched a new high volume range of controls, monitors and totalisers for flow measurement applications.
The 100 Series is designed to deliver accurate field instrumentation for the process industries, particularly applications where a robust weatherproof IP67 unit is required. All models feature simple programming, large display and input linearisation for…
Read More »
Read More »
Valves
AS-Schneider, a specialist in the field of industrial valves, now provides a range of anti-tamper valve head units to allow plant operators to protect their valves against undesired manipulation.
Valves play an important role when it comes to the safety of process equipment and power stations. Unauthorised access or accidental operation can quickly lead to catastrophic results. However, both…
Read More »
Read More »
Valves
The precision fluidics division of Parker Hannifin has released a new miniature solenoid actuated poppet valve for the pharmaceutical industry.
The Series MX – Model 7 is a miniature solenoid valve that provides portable medical device manufacturers a high performing, energy efficient pneumatic on/off control valve in a compact 10mm size.
'With the growing pressure to improve patient…
Read More »
Read More »
CONNECT WITH US
Latest Video
Catalyst for Change: Sustainable and Efficient Flow Control for the Chemical Industry
Leading #experts from the #water industry and academia to discuss sustainable approaches to water scarcity at upcoming multi-purpose event in complex
positioned on Liverpool's heritage waterfront.
https://fluidhandlingmag.com/news/desalination-and-reuse-event-explores-water-resilient-future/
#fluidhandling #water #technology #pumps #pipes #valves