News
Pumps
Industrial and mining pumps specialist Global Pumps has released the new Mag Drive High Head Series from Techniflo to meet the needs of businesses and individuals requiring efficient pumps in their processes.
Designed and manufactured by Techniflo, the Mag Drive High Head Series pumps have a leak-free design to address the application demands of industries processing caustic or acidic…
Read More »
Read More »
Flowmeters
Fluid Components International (FCI), a global flow sensing and measurement company, has introduced a new SIL2 compliant flow switch/monitor for a wide range of processing and production applications.
Designed for industrial processes, manufacturing operations, pumps, compressed air, gas compressors, and HVAC systems requiring flow assurance and alarming, the new FS10i flow switch/monitor is…
Read More »
Read More »
Flowmeters
In February, Fluid Handling International reported that the fluid metering product line of Avery-Hardoll had been acquired by Avanti.
In correction to this story, the Avery-Hardoll flowmeter business has in fact been acquired by Liquid Controls, and not Avanti.
Liquid Controls, an Idex Energy & Fuels business, purchased the Avery-Hardoll fluid metering product line from…
Read More »
Read More »
Valves
Crane ChemPharma & Energy has launched the new Crane FKX 9000 triple offset butterfly valve for the harsh conditions of critical process applications, steam isolation, and temperature extremes.
The new valve delivers high flow control, optimized Cv and low Delta P in a single valve.
Engineered to address the inherent dangers of demanding applications, the FKX 9000 adheres to the…
Read More »
Read More »
Pumps
KSB Aktiengesellschaft, a German pumps manufacturer, has released the youngest generation of its Amarex KRT submersible motor pumps for the first time in Germany.
The pump type is used for handling all kinds of municipal and industrial wastewater at a maximum flow rate is 10,080m3/h and a head of 120m.
With 850kW, it offers the highest motor power available on the market as standard, according to…
Read More »
Read More »
Pumps
The Las Vegas Street wastewater treatment plant in Colorado Springs, US, dates back to the early part of the 20th Century.
In the early 1980s, the city needed to expand the plant and investigated ways to transport primary sludge across town to its Hannah Ranch, now Clear Springs facility 18 miles away for further processing.
Brown & Caldwell, a US engineering solutions company, recommended…
Read More »
Read More »
Valves
IMI Precision Engineering, a fluid and motion control technologies provider, has created the next generation of its IMI Buschjost control valve range by equipping drive system 9668 with an integral stepper motor and newly-developed control card.
Previously driven by a DC motor, the new model benefits from reduced manufacturing tolerances due to the factory calibration of each stepper motor,…
Read More »
Read More »
Valves
Orseal, a UK-based industrial valve manufacturer, has been awarded an order to supply a range of valve products to a major $3.7 billion (€3.25bn) offshore development in the United Arab Emirates.
Located 80km off the coast, the Upper Zakum oil field project (UZ750) is considered to be one of the major technical achievements in Abu Dhabi, and oil production capacity is set to increase to…
Read More »
Read More »
Other
Engineers from the University of Utah (UoU) in the US have developed a new type of fibre material for a handheld scanner that can detect small traces of alkane fuel vapour.
The discovery is a valuable advancement that could be an early-warning signal for leaks in an oil pipeline, an airliner, or for locating a terrorist’s explosive.
The research team is led by UoU materials science and…
Read More »
Read More »
Valves
Danfoss has introduced the new ICV (H)A4A control valve with flanges, which is intended to be able to replace common flanged control valves on the market.
Inspired by the ICV Flexline platform, the ICV (H)A4A’s modular design extends the lifetime of existing refrigeration installations while delivering a reduction in cost, energy, and servicing and maintenance times, Danfoss says.
The new…
Read More »
Read More »
Flowmeters
Titan Enterprises, a UK flow equipment specialist, has introduced Process Atrato, a new low volume, high performance ultrasonic flowmeter packaged to address the challenges of the process and control environment.
The compact flowmeter combines the advantages of Titan’s Atrato ultrasonic technology – including high linearity and sensitivity and wide flow range linearity – with a…
Read More »
Read More »
Other
Kansas-based fluid handling equipment manufacturer Cashco has introduced a new Model PL1 in-line pressure regulator to accommodate high flow capacities and pressures.
The PL1 is similar to Cashco’s existing Model 5381 regulator, which is a stainless steel pressure reducing regulator designed for sanitary biotechnical process piping systems.
However, the PL1 is built for greater flow…
Read More »
Read More »
Valves
Emerson Process Management has introduced the Enardo 850/950 series of wirelessly-monitored pressure vacuum relief valves (PVRVs) that provide safety and emissions control by managing the pressure in storage tanks.
The pressure in storage tanks in the oil and gas, chemical, petrochemical and pharmaceutical industries fluctuates due to changes in temperature, liquid level, or both, and a PVRV…
Read More »
Read More »
Other
Viatran, an ISO9001-certified manufacturer of pressure and level transmitters, has launched its Model 247/347 Series of low-cost pressure transmitters, designed for demanding industrial and OEM environments.
The transmitters’ all-welded design incorporates a bonded foil strain gage on a hardened stainless steel diaphragm, along with fully potted electronics.
This higher mass diaphragm…
Read More »
Read More »
Pumps
The Hansa-TMP Mechatronics Research Centre, based in Modena, Italy, in collaboration with the Engineering Department of the University of Modena and Reggio Emilia, has developed the TPV 3600 axial piston pump series.
The TPV 3600 pump is modular in all its parts, and shares the same body between all pumps in the model range.
In order to improve the efficiency and the performance of the system,…
Read More »
Read More »
Other
Lanner, a simulation-based decision-making software producer, has been awarded a contract by Cameron LNG to supply its liquefied natural gas (LNG) Logistics Simulator.
The software will enable Cameron LNG to efficiently simulate a range of scenarios for the potential expansion of its export terminal on the Calcasieu Channel in Louisiana, US.
In February 2015, Cameron LNG initiated the…
Read More »
Read More »
Other
Triple Clear Water Solutions (TCWS) has rolled out of its Seromix advanced metals removal technology for municipal water supplies and industrial water treatment and remediation.
The proven and validated Seromix technology reduces the cost of metals removal from water, bringing the promise of the safest water supply to local, national, or international populations.
Implementation is also better…
Read More »
Read More »
Other
Garlock, a New York-based manufacturer of high-performance fluid sealing and pipeline protection products, has launched the Guardian XL bearing isolator, available in 12” to 24” sizes.
Based on the existing design of the standard-sized Guardian bearing isolator, the Guardian XL is meant specifically for heavy-duty applications with large, high-speed rotating…
Read More »
Read More »
CONNECT WITH US
Latest Video
Catalyst for Change: Sustainable and Efficient Flow Control for the Chemical Industry
Andy Burnham, the former editor of @BulkDistributor magazine which forms part of the @FluidHandIntl stable of publications, has been formally sworn in as the new Prime Minister of the United Kingdom.
https://fluidhandlingmag.com/news/ex-editor-andy-burnham-sworn-in-as-new-uk-prime-minister-after-starmer-steps-down/
#fluidhandling #PM #AndyBurnham
#Kent has announced its continued support of #OXEA Corporation through a long-term Engineering Services Agreement and the award of detailed engineering services for a major specialty chemicals project at OXEA’s Bay City facility.
https://fluidhandlingmag.com/news/kent-awarded-epcm-services-for-major-oxea-specialty-chemicals-project/
#fluidhandling #pumps
@Hydrolevel_Company, a leading manufacturer of temperature and liquid level controls, has highlighted its Steam Pro Kit, a low water cut-off kit designed specifically for steam boiler gauge glass attachments.
https://fluidhandlingmag.com/news/hydrolevel-highlights-steam-pro-kit-for-upgrading-mechanical-low-water-cut-offs/
#fluidhandling #technology #water #systems