Archive News
Flowmeters
Flowmeters
Chemoil Middle East DMCC has fitted its time-chartered and owned barges in Fujairah with E&H mass flowmeter (MFM) systems that have passed the TR48 acceptance test.
Chemoil worked closely with Lloyd's Register (LR), together with the National Metrology Centre (NMC) of Singapore, A*Star, and bunker consultancy Metcore International to certify the barge systems to Singapore MPA’s…
Read More »
Read More »
Flowmeters
Arjay Engineering has discontinued its 4100-OCF open channel flow monitor, and replaced it with the new 4100-PRO monitor.
The 4100-PRO is a multi-oil/water interface profiler monitor and uses multiple sensing probes to measure the capacitance field at distinct points within the tank.
The resulting profile can be used to track the vertical location of an interface/rag layer and the emulsion…
Read More »
Read More »
Flowmeters
Dutch monitoring equipment manufacturer VPInstruments has introduced a new reliable and easy to use compression fitting and safety cable for all VPFlowCopes models of flowmeters.
The Delft-based company produces flowmeters that have to be inserted into pressurised systems.
With such meters, it is important that there is a clearly visible safety cable to keep the sensor secure, even when the…
Read More »
Read More »
Flowmeters
Krohne has introduced the Opticheck flowmeter verification tool, providing in-situ verification for mass and other flowmeters and enabling operators to perform preventive maintenance and responsive service.
When the Opticheck is connected in-line on site, it gathers measuring data to ensure that the flowmeter is performing within 1% of the factory calibration, with a confidence level of 95%.
The…
Read More »
Read More »
Flowmeters
Ultrasonic flare metering company Fluenta has renewed its partnership agreement with Netherlands-based liquid and gas flow solutions provider Wegman.
The agreement marks a successful commercial relationship spanning almost a decade that supports Dutch operators with regulatory compliance, safety management, and emissions reductions, Fluenta says.
Wegman provides advice, products, installation and…
Read More »
Read More »
Flowmeters
Flow solutions provider Fluid Components International (FCI) has established a joint venture with GAS Arabian Services Co. called Fluid Components Saudi Arabia.
The new joint venture in Saudi Arabia offers service and support for all local and regional users of FCI instrumentation.
The facility provides immediate access to FCI engineering and technical support, local spare parts inventory and…
Read More »
Read More »
Flowmeters
Burger & Brown Engineering has released the new Tracer VM electronic flowmeter with a user interface employing vortex shedding technology to monitor liquid flow rate and temperature.
The newly designed control circuit provides some of the same features as the company’s previous switching tracer flowmeter such as turbulent flow indication (FCI technology) with a glycol input of up to 30%…
Read More »
Read More »
Flowmeters
Flow measurement specialist Krohne has upgraded its entire range of Optimass Coriolis mass flowmeters to feature entrained gas management (EGM) technology.
With the latest additions of Optimass 3400 and 7400, the whole Optimass series now offers continuous and repeatable mass flow or density measurement with two-phase flows, such as liquids mixed with gas, slurries with gases, or highly viscous…
Read More »
Read More »
Flowmeters
The global market for flowmeters is estimated to reach $8.72 billion (€7.94bn) by 2021, registering a compound annual growth rate of 6.4% between 2016 and 2021.
The market for flowmeters is largely driven by the rising demand for accurate measuring instruments from water and wastewater, and oil and gas industries.
There is an increased demand for reliable flowmeters, which is driving the…
Read More »
Read More »
Flowmeters
Tricor Coriolis Technology has released the new TCMH-0450 high pressure Coriolis flowmeter with certification for use in hazardous areas.
This meter is particularly well suited to the oil and gas industry for high pressure chemical injection applications, as well as gas measurement applications such as engine test benches, hydrogen fuel stations, and high pressure gas measurement in numerous…
Read More »
Read More »
Flowmeters
Titan Enterprises, through its agent JLC International for North and South America, has shipped 39 Atrato ultrasonic flowmeters to Peruvian engineering company Dynaflux.
Working collaboratively on a complex project with Minas Buenaventura, Peru's largest publicly-traded precious metals company, the team sought a flowmeter that offered high accuracy and repeatability at low flow rates.
The Atrato…
Read More »
Read More »
Flowmeters
Fluid Components International (FCI) has released the new advanced, SIL IEC 61508 compliant ST51A and ST75A thermal mass flowmeters as a solution for air/gas flow measurement.
For engineers designing safety instrumented systems, these models provide compact, low-cost thermal flow metering solutions carrying a SIL rating.
They were independently evaluated by world leading functional safety…
Read More »
Read More »
Flowmeters
Fluenta, a global ultrasonic flare meter manufacturer, has announced that the Colorado Engineering Experiment Station (CEESI) has proved Fluenta meters perform with an uncertainty of less than 3% without prior calibration.
Fluenta tested its 160 Flare Gas Meter at the CEESI testing facility in Colorado, US. The results show that taken “straight out of the box” – without…
Read More »
Read More »
Flowmeters
US-based measurement solutions developes McCrometer has added new plug-and-play real-time Smart Output communications to its FPI Mag, SPI Mag, and Ultra Mag flowmeter.
The three meters all provide a solution for automatic meter reading (AMR) and advanced meter infrastructure (AMI) in support of utility smart grids that help conserve water resources, reduce expensive non-revenue water costs, and…
Read More »
Read More »
Flowmeters
LinkQuest, a California-based acoustic measuring instrument manufacturer, has added a broadband option to its FlowScout 2000 acoustic flowmeter line.
With the added option, the FlowScout 2000 system is capable of measuring current speeds reliably starting from a distance of 16cm, with a cell size of 2cm and up to a maximum number of 100 cells.
Since its debut in 2008, the FlowScout 2000…
Read More »
Read More »
Flowmeters
Fluid Components International (FCI) has expanded its compact thermal flowmeter line with a new electronics design that features the addition of HART, Version 7, digital bus communication.
The new models ST51A, ST75A, and ST75AV provide users with an economical yet rugged solution to measuring gases or air in demanding industrial process and plant applications.
The meters combine all new…
Read More »
Read More »
Flowmeters
Measuring technology manufacturer Krohne’s ultrasonic flowmeter Optisonic 3400 is now available with heat meter approval according to MID 2014/32/EU Annex VI MI-004 (and harmonised CEN EN1434, OIML R75) in accuracy classes 1, 2, and 3.
Target applications include district heating networks, commercial and industrial heat metering applications, as well as energy and utility applications in…
Read More »
Read More »
Flowmeters
US metering equipment manufacturer Bell Technologies has introduced the Multiphase Toruswedge (MPT) high-pressure flowmeter for safely measuring multiphase volumetric flow rates for wellbore processes.
The meter is designed to provide high accuracy volumetric flow measurement on drilling rigs and can be used for multiple applications ranging from low to extremely high pressure.
The MPT is…
Read More »
Read More »
CONNECT WITH US
Latest Video
Catalyst for Change: Sustainable and Efficient Flow Control for the Chemical Industry
Technology company @ovarro_ltd is expanding its global #channel partner network as utilities worldwide galvanise their efforts to tackle #water loss and strengthen #digital capability.
https://fluidhandlingmag.com/news/ovarro-expands-leakage-and-process-control-partner-network/
#fluidhandling #pumps #pipelines #valves
Bandlock™2 Quick Opening Closures from @GD_Engineering are available in diameters of 90 inches and above, offering the potential to realise significant project savings in engineering time.
https://fluidhandlingmag.com/news/pressure-vessel-access-solutions-to-support-black-powder-filtration-and-pigging-operations/
#fluidhandling #oilandgas #technology #pipeline