Archive News
Flowmeters
Fluid Components International (FCI), a global flow sensing and measurement company, has introduced a new SIL2 compliant flow switch/monitor for a wide range of processing and production applications.
Designed for industrial processes, manufacturing operations, pumps, compressed air, gas compressors, and HVAC systems requiring flow assurance and alarming, the new FS10i flow switch/monitor is…
Read More »
Read More »
Valves
Crane ChemPharma & Energy has launched the new Crane FKX 9000 triple offset butterfly valve for the harsh conditions of critical process applications, steam isolation, and temperature extremes.
The new valve delivers high flow control, optimized Cv and low Delta P in a single valve.
Engineered to address the inherent dangers of demanding applications, the FKX 9000 adheres to the…
Read More »
Read More »
Pumps
KSB Aktiengesellschaft, a German pumps manufacturer, has released the youngest generation of its Amarex KRT submersible motor pumps for the first time in Germany.
The pump type is used for handling all kinds of municipal and industrial wastewater at a maximum flow rate is 10,080m3/h and a head of 120m.
With 850kW, it offers the highest motor power available on the market as standard, according to…
Read More »
Read More »
Pumps
The Las Vegas Street wastewater treatment plant in Colorado Springs, US, dates back to the early part of the 20th Century.
In the early 1980s, the city needed to expand the plant and investigated ways to transport primary sludge across town to its Hannah Ranch, now Clear Springs facility 18 miles away for further processing.
Brown & Caldwell, a US engineering solutions company, recommended…
Read More »
Read More »
Other
SensoTech, a German manufacturer of inline analysis systems for process fluids, has been awarded the DIN EN ISO 9001 quality certification for its products.
The accredited test and certification body TÜV Nord hands out the ISO 9001 certification to confirm compliance with its stringent quality requirements to ensure customer satisfaction.
"Our quality-conscious customers place high value on…
Read More »
Read More »
Valves
IMI Precision Engineering, a fluid and motion control technologies provider, has created the next generation of its IMI Buschjost control valve range by equipping drive system 9668 with an integral stepper motor and newly-developed control card.
Previously driven by a DC motor, the new model benefits from reduced manufacturing tolerances due to the factory calibration of each stepper motor,…
Read More »
Read More »
Valves
Orseal, a UK-based industrial valve manufacturer, has been awarded an order to supply a range of valve products to a major $3.7 billion (€3.25bn) offshore development in the United Arab Emirates.
Located 80km off the coast, the Upper Zakum oil field project (UZ750) is considered to be one of the major technical achievements in Abu Dhabi, and oil production capacity is set to increase to…
Read More »
Read More »
Other
Engineers from the University of Utah (UoU) in the US have developed a new type of fibre material for a handheld scanner that can detect small traces of alkane fuel vapour.
The discovery is a valuable advancement that could be an early-warning signal for leaks in an oil pipeline, an airliner, or for locating a terrorist’s explosive.
The research team is led by UoU materials science and…
Read More »
Read More »
Valves
Danfoss has introduced the new ICV (H)A4A control valve with flanges, which is intended to be able to replace common flanged control valves on the market.
Inspired by the ICV Flexline platform, the ICV (H)A4A’s modular design extends the lifetime of existing refrigeration installations while delivering a reduction in cost, energy, and servicing and maintenance times, Danfoss says.
The new…
Read More »
Read More »
Valves
Emerson Process Management has introduced the Enardo 850/950 series of wirelessly-monitored pressure vacuum relief valves (PVRVs) that provide safety and emissions control by managing the pressure in storage tanks.
The pressure in storage tanks in the oil and gas, chemical, petrochemical and pharmaceutical industries fluctuates due to changes in temperature, liquid level, or both, and a PVRV…
Read More »
Read More »
Pumps
Centrifugal pumps designer and manufacturer Amarinth has been awarded an order to supply high-quality, bespoke API 610 VS4 vertical pumps to Cannon Bono Artes for use by ADCO in the Middle East.
The pumps will delivered as part of a produced oily water separator treatment package destined for the ADCO Rumaitha and Shanayel Phase 3 enhanced oil recovery project.
Rumaitha and Shanayel form part of…
Read More »
Read More »
Other
Kansas-based fluid handling equipment manufacturer Cashco has introduced a new Model PL1 in-line pressure regulator to accommodate high flow capacities and pressures.
The PL1 is similar to Cashco’s existing Model 5381 regulator, which is a stainless steel pressure reducing regulator designed for sanitary biotechnical process piping systems.
However, the PL1 is built for greater flow…
Read More »
Read More »
Other
Electro-Chemical Devices (ECD) has released a new single or dual parameter CA-6 UV family of spectroscopic analysers that can monitor any two selected parameters in separate measurement ranges for ammonia, nitrate, or chemical oxygen demand (COD 254 nm).
ECD’s CA-6 UV analyser family provides a highly accurate, reliable, and economical on-line sampling system that is designed with UV…
Read More »
Read More »
Flowmeters
Titan Enterprises, a UK flow equipment specialist, has introduced Process Atrato, a new low volume, high performance ultrasonic flowmeter packaged to address the challenges of the process and control environment.
The compact flowmeter combines the advantages of Titan’s Atrato ultrasonic technology – including high linearity and sensitivity and wide flow range linearity – with a…
Read More »
Read More »
Pumps
Power management company Eaton has launched new high-performance DWF duplex lubrication oil filters to help preserve hydraulic pumps, motors, bearings and gears.
The DWF series of filters feature a three-way changeover ball valve so that when service is required on one side, the filtration flow is easily switched to the other chamber.
The new PTFE sealing system on the switchgear ensures easier…
Read More »
Read More »
Other
Griffco Valve, based in Amherst, New York, has introduced its new line of pulsation dampeners to enhance the performance of chemical feed systems.
The addition of a Griffco pulsation dampener to a pumping system will reduce harmful shock waves and deliver continuous chemical dosage at the injection point, according to the company.
In an initial release, nine volumetric sizes are offered ranging…
Read More »
Read More »
Valves
VTTI, a worldwide independent provider of energy storage solutions, has awarded a client support programme (CSP) contract to Rotork for the maintenance of critical valve actuation assets at the VTTI Vasiliko oil storage terminal in Cyprus.
Approximately 400 Rotork IQ3 actuators controlled by Rotork’s Pakscan two-wire digital networks that manage the flow of media throughout the terminal…
Read More »
Read More »
Valves
Valve manufacturer AVK, which services the North and South American markets, has recently released its knife gate valve series 702/73 with a new linear electrical actuator.
The valves are available in DN 50-300 with the same actuator type for the complete range.
The linear electrical actuator is a robust product used in many different industrial applications, which makes it appropriate for use in…
Read More »
Read More »
CONNECT WITH US
Latest Video
Catalyst for Change: Sustainable and Efficient Flow Control for the Chemical Industry
Expressions of interest (EoI) are being sought by leading research organisation @UK_WIR for expert #partners ready to carry out targeted research projects to tackle critical #water #industry #problems.
https://fluidhandlingmag.com/news/latest-ukwir-projects-available-for-expression-of-interest/
#fluidhandling #pumps #pipelines #valves #technology
For an expanding #pig business in #Yorkshire that needed to meet environmental permitting regulations, A-Consult has completed the installation of a new 2200 m3 concrete slurry tank, together with a pump and mixer, installed by @Landia.
https://fluidhandlingmag.com/news/new-pig-slurry-store-with-pump-and-mixer-works-wonders-for-farmers-crops/
#fluidhandling
#Dŵr Cymru Welsh Water (DCWW) has signed a three-year #agreement with industrial artificial intelligence (AI) specialist Samotics for the on-going predictive condition monitoring of critical #wastewater assets across its estate.
#fluidhandling #pumps