Cities are the engines of the global economy and the central organising forces of human society. Just over half of the global population resides in urban areas today, and that figure is projected to rise to two-thirds by 2050. Urban life is a fact of life for a growing share of the world. As the third decade of the 21st century unfolded, urban life came to a screeching... [Read More]

Cities are the engines of the global economy and the central organising forces of human society. 
Just over half of the global population resides in urban areas today, and that figure is projected to rise to two-thirds by 2050. Urban life is a fact of life for a growing share of the world.
As the third decade of the 21st century unfolded, urban life came to a screeching... [Read More]

Celeros Flow Technology (CFT) has injected new life into a heritage pump for a Canadian heavy oil recovery customer, enabling them to increase production. The pump – a Mather & Platt BB5 – was more than 40 years old and had been subject to numerous post-installation alterations.   Viscous substance   Heavy oil deposits are extremely viscous and... [Read More]

Northern Green Crane will help ramp up pan-European hydrogen transport infrastructure, which will be assisted by Liquid Organic Hydrogen Carrier (LOHC) technology. It will become one of the first industrial-scale green hydrogen import projects for Germany and the Netherlands, which will help to increase Europe’s energy security and to contribute to the ambitious plans... [Read More]

The Combined Cycle Power Plant (CCPP), one of the largest CCPPs in South Korea, is located in the Gyeonggi Province and has a capacity of 1,900 MW. The heart of the plant consists of four gas turbines, two steam turbines and generators, all made by Mitsubishi Heavy Industries Ltd. The six boiler feed water pumps were supplied by a Korean pump manufacturer. Ever since... [Read More]

Scottish Water’s Kinneil Kerse WwTW produces an estimated 4,701 tds of dewatered sludge which is conditioned with lime for use as fertiliser on land. The sludge operation at this site has been funded and is operated by Veolia who are contracted by Scottish Water. In 2021, as part of a modernisation project delivered by Veolia, two competitor’s progressive cavity (PC)... [Read More]

The demands for safety, efficiency and environmental responsibility from the oil, gas and energy industries have significantly impacted the selection of pneumatic valve actuator for quarter turn failsafe valves (ball, butterfly and plug) and dampers. Actuator sixing depends on the various valve torque values, minimum supply pressure and actuator-valve safety margins /... [Read More]

Operators in the oil and gas sector are facing some big challenges – many of which are being exacerbated by the current pandemic. Oil prices are low and production in a surplus. The cyclic nature of the industry means there is an ongoing need for cost saving and efficiency. However, keeping production costs lean must be balanced with the need for safety. This not only... [Read More]

A total of 17 countries in South-East and Eastern Europe, the Caucasus, and Central Asia, plus Kosovo[2], saw an unprecedented growth in renewable power capacity between 2017[1] and 2021. Over this period, they cumulatively added 21 gigawatts (GW) of capacity, for a total installed renewable power capacity of 106 GW[3]. Released on September 14, the UNECE Renewable Energy... [Read More]

With no need for compressed air, early electric actuators can operate with less sound and less maintenance than the predominant pneumatic actuator. Of course, the standard pneumatic option offered its own apparent benefits – performance in extreme temperatures, for example, and an elegant simplicity. As a result, the flow control industry has stubbornly clung to pneumatic... [Read More]

A recent move to further reduce emissions caused by excessive energy consumption has seen the Norwegian government offering funding to companies that lessen their contribution to CO2 and NOx figures. One oil facility took the opportunity to rerate two condensate export pumps, which would not only reduce energy consumption but also optimise performance for the remaining... [Read More]

If an organisation is considering building a new fluid or sampling system, chances are it will cost significant capital. Throughout the process, it is equally important to consider the human capital necessary to make the new system work as well. It takes a specific set of skills to design a safe and efficient system with the right components, as well as to install all... [Read More]

In addition to the transformation towards a climate-neutral chemical industry and the perennial topic of digitalisation, the current global political situation also poses massive challenges for the process industry. Which technologies can be used to achieve defossilisation? How to secure and enhance regional and global supply chain networks? What hurdles must be overcome... [Read More]

Antonio Castilhos, vice president of national sales, NETZSCH Pumps North America, outlines the growth in this pump sector The adoption of multi-screw pumps has increased exponentially over the past five years or so, with the consumption volume rising from 146,000 units in 2015 to 202,000 units this year. This rapid rise has been fuelled by a number of factors, including... [Read More]