Archive News
Pumps
Warning: Attempt to read property "ID" on false in /var/www/vhosts/fluidhandlingmag.com/public_html/wp-content/themes/woodcote-magazines/page-news_feed.php on line 69
Pumps
Flowserve, a provider of flow control products and services for the global infrastructure markets, has announced it has received a major order to provide multiple pumping systems to Alstom, a France-based global leader in power generation.
The orders, totalling approximately $30 million (€23.6 million), were booked in the second quarter of 2014. The pumping systems will be used for boiler…
Read More »
Read More »
Pumps
Alfa Laval, a company specialising in heat transfer, centrifugal separation and fluid handling, has won an order to supply Framo water pumping systems to an oil drilling platform that will be located in the Atlantic Ocean off the Canadian coast. The order, booked in the Marine & Offshore Pumping Systems segment, has a value of approximately SEK 120 million (€13.1 million) and delivery is…
Read More »
Read More »
Pumps
Cat Pumps has introduced an energy-saving high pressure pump package for centralised hygiene and sanitation cleaning systems.Called 'Wash-Saver', the package utilises a variable frequency drive (VFD) and returns typically 85% mechanical energy efficiency irrespective of operating speed.
The Wash-Saver concept uses a feedback signal to the VFD to control the pump speed. The pump, drive motor,…
Read More »
Read More »
Pumps
Crane Chempharma has expanded its line of aluminium air-operated double diaphragm (AODD) pumps with two additional sizes.
The next generation DEPA DH line of AODD pumps now includes the sizes DH50 and 80. With this addition, the advanced flanged range now consists of five sizes that are certified to ATEX Zone 1.
Aluminium DEPA DH pumps are designed for use in the paint, petrochemical and…
Read More »
Read More »
Pumps
Blackmer has extended its XLW Series of sliding vane pumps, introduced in 1978, with a new 4" model.
The XLW4A model, like all XLW Series pumps, has been designed to perform in the handling and transfer of a variety of abrasive liquids, including oxide primers, inks and paints, where wear-resistance is critical to pump operation. XLW Series pumps have also shown to be successful in applications…
Read More »
Read More »
Pumps
CECO Environmental, a global environmental technology company focused on critical solutions in the air pollution control (APC), energy, fluid handling and filtration industries, has announced that its Met-Pro Global Pump Solutions subsidiary (MPGPS) recently introduced the patent-pending Fybroc Series 8500 All-FRP vertical turbine pump.
This new technology features four fluid handling sizes…
Read More »
Read More »
Pumps
Fluid systems in medical devices are becoming compact and more sophisticated. The traditionally used syringe pumps seem no longer able to keep up with the new requirements in terms of size, cost and performance. Valve-less piston pumps that combine the benefits of syringe pumps with lower cost and higher performance, could be the solution.
Historically, syringe pumps have long been the mainstay…
Read More »
Read More »
Pumps
Wilden, part of Dover Corporation's Pump Solutions Group (PSG), has introduced a new line of air-operated double-diaphragm (AODD) pumps.
Advanced FIT AODD pumps fit bolt-to-bolt and pipe-to-pipe in existing fluid-handling piping systems to provide increased performance with no repiping necessary.
'Advanced FIT pumps have been designed to 'drop into' the existing plumbing footprint with no…
Read More »
Read More »
Pumps
Alfa Laval – a specialist in heat transfer, centrifugal separation and fluid handling – has won an order to supply Framo pumping systems to Samsung Heavy Industries in South Korea. The order, booked in the Marine & Offshore Pumping Systems segment, has a value of approximately SEK 240 million (€26.1 million) and delivery is scheduled for 2015.
The order is comprised of…
Read More »
Read More »
Pumps
Pumps specialist Michael Smith Engineers is supplying Flotech Performance Systems with Viking's SG range of external gear pumps for use in the company's additive and dye injection skids for petroleum and chemical applications.
These skids vary in scope from injection hardware skids through to full turnkey systems designed to meet individual customer requirements and can incorporate features such…
Read More »
Read More »
Pumps
Watson-Marlow Fluid Technology Group (W-M) announced that a trial of its new Apex35 Bredel hose pump at German energy-from-waste producer EEW Saarbrücken's plant has indicated the pump's potential to cut maintenance costs.
The company reports its Apex35 pump was able to run without clogging for a long period while pumping abrasive brine and that the downtime and cost of replacement parts was…
Read More »
Read More »
Pumps
Australian Pump Industries has released a new range of submersible pumps by Tsurumi Pumps, designed to handle corrosive liquids.
The new TM Series pumps are intended for a range of duties from aquaculture to chemical spill containment, particularly where corrosion is an issue.
The stator housing is titanium whilst the pump casing, stand and motor cap components are manufactured from FRP resin…
Read More »
Read More »
Pumps
From butter and ice cream to yogurt, dairy products are a staple at many tables and the global demand is on a steady rise.
Dairy products are variable in consistency and viscosity, and thus effective pumping equipment is needed to transport them during the production process, and rigorous processing standards are in place to ensure the quality of the produced goods.
One of the most popular…
Read More »
Read More »
Pumps
Following the release of its Dura 45 hose pump, Verderflex has expanded the line with the Verderflex Dura 55, designed to deliver over 20% more flow.
The addition of the Verderflex Dura 55 expands the Dura range's flow rates from <1 l/hr to 15.3 m³/hr at pressures up to 16 bar.
Designed to meet growing market demands for a pump that can reduce life cycle costs, maximise plant uptime and…
Read More »
Read More »
Pumps
Ingersoll Rand has introduced the ARO Station, a new customized pumping station housing an ARO pump and piping in a durable housing in order to reduce leaks and fumes during chemical transfer between containers.
The ARO Station is placed independently in a truck and is supposed to help operators comply with changing environmental regulations while enhancing operator safety.
The ARO Station can…
Read More »
Read More »
Pumps
Australian Pump Industries has introduced new submersible pumps to deal with the challenge highly corrosive environments pose.
Australian construction sites and mines are often faced with the problem of moving contaminated and corrosive water, with which cast iron submersible pumps are unable to cope with and often fail prematurely.
The SFQ series by Tsurumi Pump, made from cast 316 stainless…
Read More »
Read More »
Pumps
Graco has released the Graco Chemsafe, a new addition to its line of AODD transfer pumps.
The Chemsafe range, designed for the transfer of very corrosive and abrasive fluids, is intended to withstand harsher applications than the company’s previous Husky range.
The new product line is available sizes ranging from ¼” up to 1.5” (up to 376 l/min), has no exposed metal…
Read More »
Read More »
Pumps
Merck Millipore, the Life Science division of Merck, has launched a new range of pumps for sterility testing of pharmaceutical products in laminar flow hoods, isolators and clean rooms.
Steritest Symbio Pumps were developed to address stringent pharmaceutical testing requirements.
'The Steritest Symbio Pumps are the newest addition to our comprehensive portfolio of innovative and reliable…
Read More »
Read More »
CONNECT WITH US
Latest Video
Catalyst for Change: Sustainable and Efficient Flow Control for the Chemical Industry
Expressions of interest (EoI) are being sought by leading research organisation @UK_WIR for expert #partners ready to carry out targeted research projects to tackle critical #water #industry #problems.
https://fluidhandlingmag.com/news/latest-ukwir-projects-available-for-expression-of-interest/
#fluidhandling #pumps #pipelines #valves #technology
For an expanding #pig business in #Yorkshire that needed to meet environmental permitting regulations, A-Consult has completed the installation of a new 2200 m3 concrete slurry tank, together with a pump and mixer, installed by @Landia.
https://fluidhandlingmag.com/news/new-pig-slurry-store-with-pump-and-mixer-works-wonders-for-farmers-crops/
#fluidhandling
#Dŵr Cymru Welsh Water (DCWW) has signed a three-year #agreement with industrial artificial intelligence (AI) specialist Samotics for the on-going predictive condition monitoring of critical #wastewater assets across its estate.
#fluidhandling #pumps