News
Valves
Rotork Instruments has acquired M&M International, an Italy-based subsidiary of Spirax-Sarco Engineering.
With the acquisition, Rotork adds M&M’s complete range of solenoid valve products to its portfolio.
Established for over 30 years, M&M is a manufacturer of general purpose solenoid valves, air actuated piston valves, automatic drain valves, connectors, coils, and customised…
Read More »
Read More »
Pumps
BBA Pumps has launched the new BA100K, a diesel-driven 4” solids handling mobile pump set.
The unit delivers good pumping performance combined with a low cost of maintenance and minimal exhaust emissions.
The dry self-priming dewatering and sewage pump has a capacity of over 190m3/hour (836 US GPM), a maximum head of 22mwc, and features free passage of 82mm.
It is driven by a…
Read More »
Read More »
Flowmeters
Developing clean fuel and hydrogen-fuelled hybrid vehicles is becoming an increasing priority for western economies.
As hybrid vehicles become more mainstream the need to provide hydrogen fuelling stations has arisen. Hydrogen fuelling stations and the concept of the ‘hydrogen highway’ are relatively new ideas, with Germany currently having 16 such stations in operation across the…
Read More »
Read More »
Pumps
Graco has launched a new line of chemical injection equipment for use in the midstream and upstream sectors of the oil and natural gas markets.
The new internally designed and developed product line includes durable pumps, advanced controllers, and accessories to dispense, control, and monitor numerous chemical fluids used to keep oil and natural gas pipelines and wellheads flowing freely in most…
Read More »
Read More »
Other
Fire pump engine packages often see the most extreme environmental conditions.
During the design and development phase it is imperative to analyse the system and validate the connection between the internal combustion engine and the driven pump.
Reich has designed a highly torsionally flexible coupling capable of supporting a drive shaft connection for the fire pump industry.
For fire pump…
Read More »
Read More »
Pipelines
Global demand for plastic pipes is expected to rise by 6.7% per annum to reach 19.3 billion metres in 2019.
The demand increase was forecast in World Plastic Pipe, a new study from The Freedonia Group, a Cleveland-based industry research firm.
According to the study, strong growth of construction activity, particularly in the large markets of China and the US, will boost the demand for plastic…
Read More »
Read More »
Pumps
Sykes Pumps has unveiled a new range of specialist Bentonite pumps.
The pumps have been developed around Sykes’ GP150M model, both in terms of specification and performance.
Available in two versions – B150 (diesel engine) and B150E (electric motor) – the Bentonite pump has been designed for projects where deep piling or excavation work is being carried out.
Both models deploy a…
Read More »
Read More »
Pumps
Jump has launched its latest hose pump range, the JH Series.
The pump design features up to 70% lower pulsation compared to a single peristaltic pump and reduced space requirements, while providing transfer capacity up to 300m3/h in the triple version.
Jump says the JH Series has low energy consumption when coupling pump bodies, with consumption increased by 30% instead of 100%.
Adaptable flanges…
Read More »
Read More »
Valves
Midland Manufacturing, part of OPW, plans to launch three new products – two pressure relief valves (PRVs), the High-FlowX and the Smart-Flow, and a detachable handle for bottom outlet valves, Tanktite.
Midland says these three new products will help customers meet DOT and Transport Canada rules for rail tank cars in North America.
The first phase of the ‘Enhanced Tank Car Standards…
Read More »
Read More »
Pumps
A Mono Compact C progressing cavity pump provided by NOV has been specified as a replacement for a previous Mono pump that had operated without problems for over 30 years.
The new pump is being used in a fertiliser production process by GrowHow, a UK fertiliser manufacturer and a supplier to the chemical process industry.
GrowHow had been using an original Mono SH80 pump for a demanding…
Read More »
Read More »
Other
Industrial Magnetics (IM) has introduced a new T-Trap magnetic separator for liquid processors that offers improved metal capture rates, durability, and ease of cleaning.
The new design features a single, large-tube magnet which provides direct, in-the-flow contact of the product to the magnetic tube.
IM says this increased contact area offers an advantage over traditional plate style…
Read More »
Read More »
Flowmeters
Badger Meter has released new oval gear flowmeters, manufactured from PVDF plastic.
The new PVDF meterz can be used in a number of applications where conventional meters are not appropriate.
They are best suited for flow measurement of viscous or high corrosive fluids, additives, AdBlue, ultrapure water and oils, but also for a wide range of chemical applications, including hydrocarbons-based…
Read More »
Read More »
Flowmeters
Based upon its proprietary oval gear design, Titan Enterprises OG-1 and OG-2 flowmeters are designed for use in high pressure applications. Constructed from durable materials including 316 Stainless Steel and PEEK, the meters are well-suited for measuring flow at pressures up to 700 Bar and 150°C.
Designed to be IP-67/NEMA 4 compliant, Titan OG-1 and OG-2 high pressure…
Read More »
Read More »
Other
Industrial engineering group Spirax-Sarco has sold M&M International to sector peer Rotork for €9.7 million.
The Spirax group acquired M&M, which manufactures piston actuated valves and solenoid valves in Bergamo, Italy, in 2000 and reported operating profit of €1.5 million and sales of €8.9 million last year.
Spirax said on Tuesday that the divestment follows a strategic…
Read More »
Read More »
Valves
Aseptic diaphragm valves are frequently used to control sterile applications, but small volumes can only be controlled with an inadequate level of accuracy, or not at all.
Gemü has released the 567 BioStar control valve in order to solve this problem. The Gemü 567 BioStar is a 2/2-way globe valve with a regulating needle or regulating cone for high control accuracy and precise dosing,…
Read More »
Read More »
Pumps
Gorman-Rupp (GR), a Mansfield, Ohio-based pump manufacturer, has rolled out a new Eradicator solids management system for its Super T Series line of self-priming centrifugal pumps.
GR says the Eradicator was developed for demanding applications, including solids-laden wastewater and slurries, to improve system uptime and to decrease the number of service calls and overall maintenance…
Read More »
Read More »
Valves
Industrial valve specialist AS-Schneider has developed a new manifold especially for use on floating production storage and offloading (FPSO) vessels.
The monoflange with dual double block and bleed function offers good operational reliability and minimum weight, which are both important in floating systems for extraction of crude oil and natural gas, the company says.
AS-Schneider originally…
Read More »
Read More »
Pumps
Sterlitech has introduced the compact and quiet TLD3000 and TLD5000 diaphragm vacuum pumps to its line of analytical laboratory equipment.
With optimized features, such as PTFE-coated contact surfaces, an oil-free design, and stainless steel valves, the pumps provide a chemically resistant and maintenance-free solution for a broad range of vacuum filtration applications.
Featuring a 1/7…
Read More »
Read More »
CONNECT WITH US
Latest Video
Catalyst for Change: Sustainable and Efficient Flow Control for the Chemical Industry
Andy Burnham, the former editor of @BulkDistributor magazine which forms part of the @FluidHandIntl stable of publications, has been formally sworn in as the new Prime Minister of the United Kingdom.
https://fluidhandlingmag.com/news/ex-editor-andy-burnham-sworn-in-as-new-uk-prime-minister-after-starmer-steps-down/
#fluidhandling #PM #AndyBurnham
#Kent has announced its continued support of #OXEA Corporation through a long-term Engineering Services Agreement and the award of detailed engineering services for a major specialty chemicals project at OXEA’s Bay City facility.
https://fluidhandlingmag.com/news/kent-awarded-epcm-services-for-major-oxea-specialty-chemicals-project/
#fluidhandling #pumps
@Hydrolevel_Company, a leading manufacturer of temperature and liquid level controls, has highlighted its Steam Pro Kit, a low water cut-off kit designed specifically for steam boiler gauge glass attachments.
https://fluidhandlingmag.com/news/hydrolevel-highlights-steam-pro-kit-for-upgrading-mechanical-low-water-cut-offs/
#fluidhandling #technology #water #systems