Archive News
Pumps
Warning: Attempt to read property "ID" on false in /var/www/vhosts/fluidhandlingmag.com/public_html/wp-content/themes/woodcote-magazines/page-news_feed.php on line 69
Pumps
Global Pumps, a major Australian supplier of industrial pumps, has extended its peristaltic pump range with the addition of the new Verderflex Vantage 5000.
Recommended for dosing chemicals in water treatment applications, the new Verderflex peristaltic pumps can provide flow rates up to 6,600ml/min and maximum pressure of 7 bar.
With a flow rate exceeding most brands in the market,…
Read More »
Read More »
Pumps
Swiss pump maker Sulzer has signed several agreements with Sohar SWRO Co. to supply pumps for the new 250,000m3/day independent desalination plant in Oman.
Commercial operation at the Sohar Independent Water Project (IWP), located Oman’s capital Sohar, is scheduled for 2018.
The new facility will allow Oman Water and Procurement Co. (OPWP), the single buyer of all privately produced power…
Read More »
Read More »
Pumps
Nordson Corp. has developed a new generation of gear pumps that provides up to 15% greater throughput without an increase in RPM.
The BKG BlueFlow gear pumps are a new-generation product range that improves upon well-known technologies developed separately by the Münster-based melt-filtration and gear pump business of Jan-Udo Kreyenborg, and by US-based Xaloy Corp.
Both companies were…
Read More »
Read More »
Pumps
Diversified industrial product manufacturer Eaton will shut down its plant in Iowa, US, in September 2017, laying off all of the plant’s 140 employees.
The shutdown process of the Spencer plant will begin in January, with the layoffs coming gradually in phases throughout the year.
The Spencer facility, which manufactures heavy duty hydraulic pumps and motors for use in mobile and industrial…
Read More »
Read More »
Pumps
Franklin Electric has introduced the FPS IGPDS dual seal grinder pump series that delivers increased pump security and performance for commercial and high-end residential applications.
The IGPDS series utilises two mechanical seals, coupled with a sensor probe and seal leak detection circuitry in the panel, to provide added pump protection that can extend the overall pump life.
If water enters…
Read More »
Read More »
Pumps
Bredel hose pumps from Watson-Marlow Fluid Technology Group (WMFTG) have replaced piston pumps on a series of prestigious €1.8 million concrete grouting projects performed in seas around the Chinese coastline.
A total of 90 Bredel pumps have been ordered for drawing the abrasive cement/sand/water slurry from the mixing tanks into the holds of seafaring vessels, and for metering the grouting…
Read More »
Read More »
Pumps
Atlas Copco has launched its new DZS 2.2 to 6.2 kW dry claw vacuum pump range incorporating an innovative modular, easy-clean design for increased simplicity and contaminant handling capability.
The DZS range is well-suited for process applications, including pneumatic conveying, woodworking, drying, sterilising, impregnation, thermoforming, and extrusion.
It comprises three models, the DZS 065…
Read More »
Read More »
Pumps
Weir Oil & Gas has reached more than 1,000 hours of pumping time in harsh conditions with is SPM QEM 3000 frac pump.
Subsequently, the Fort Worth, Texas-based company reports it has agreed on a sale of a fleet of the pumps to Canyon Services Group, based in Calgary, Canada.
The two companies intend to deploy the SPM QEM 3000 frac pump to production sites in the Duvernay and…
Read More »
Read More »
Pumps
American Control Electronics (ACE) has partnered with Brother Gearmotors, a division of Brother International Corp.m which will offer ACE’s premium selection of variable frequency drives (VFDs).
The VFDs are offered as a product add-on to Brother’s portfolio of ultra-reliable, sub-fractional AC gearmotors and reducers.
OEM customers benefit by having easy access to an optimised VFD…
Read More »
Read More »
Pumps
French family-owned pump maker Jump has expanded its pump offering, and all of the company’s pumps can now be adapted for ATEX Zone 2 environments.
In a development process and to meet the growing needs of handling flammable liquids or combustible materials, Jump has certified its eccentric disc pump range JE Series for Zone 1.
The product range’s pumps, available in six sizes, comply…
Read More »
Read More »
Pumps
Grundfos is extending its SL and SE range of wastewater pumps to include “medium,” “high” and “super high” hydraulic offerings from 12 to 42 horsepower.
Designed to handle raw unscreened sewage, effluent, and large volumes of surface and process water, the extended selection ensures the highest pump efficiencies over a wider range of demand and the largest free…
Read More »
Read More »
Pumps
Ebsray Pumps, a designer and manufacturer of regenerative turbine and positive displacement pump technologies, has released the new RC40 Series regenerative turbine pump.
The new pumps are targeted at liquefied gas applications, including liquefied petroleum gas, autogas, DME, aerosols, industrial refrigerants, and liquid CO2.
Developed as a replacement for the Ebsray R10 model, the new RC40 pump…
Read More »
Read More »
Pumps
German pump maker Pfeiffer Vacuum has released the Duo 11 ATEX rotary vane pump for processes taking place in potentially explosive atmospheres or conveying explosive gases and vapours.
The Duo 11 ATEX meets ATEX directive 2014/34/EU and as such it satisfies the most stringent explosion protection requirements.
The ATEX certification applies for both the interior and exterior of the pump, and it…
Read More »
Read More »
Pumps
The positive displacement pump expert Netzsch Pumps & Systems has developed the Full Service in Place (FSIP) concept for progressing cavity pumps and rotary lobe pumps.
In biogas production, processes must inter-relate smoothly and downtimes should be avoided whenever possible – even service breaks should be plannable and short.
The FSIP system thereby improves the service-friendliness…
Read More »
Read More »
Pumps
Ruhrpumpen, a global centrifugal and reciprocating pump technology company, has completed an order for an API 674 3rd edition reciprocating plunger pump from INFRA Technology.
The pump was delivered for use in a plant demonstrating the production of synthetic crude from natural gas in Wharton, close to Houston, Texas, US.
The plant will serve as a demonstration of INFRA Technology’s…
Read More »
Read More »
Pumps
AxFlow has added the aluminium HS430S, the latest Wilden AODD pump suited for applications that require high head pressures, such as viscous and solid-laden slurries, to its product range.
The HS430S high pressure aluminium pump comes equipped with the FIT wetted path that minimises the number of fasteners and allows for single socket reassembly for faster, easier maintenance.
The new pump also…
Read More »
Read More »
Pumps
Netzsch Pumps North America has introduced the new iFD Stator 2.0, which combines efficiency, economy and environmental safety in one unique system.
Featuring a two-part, reusable stator housing and replaceable stator, the iFD Stator 2.0 is compatible with all Nemo NM series progressing cavity pumps.
Changing the stator within the housing is easy with simple compression-free assembly…
Read More »
Read More »
Pumps
UK-based vacuum products manufacturer Edwards has launched a new turbomolecular pump, the nEXT85, which delivers improved performance in a smaller package, while maintaining high levels of reliability.
The new nEXT85 rotor has been optimised to achieve both higher speeds and higher compression while maintaining reliability and reducing size.
The nEXT85 is suited to a range of R&D and high…
Read More »
Read More »
CONNECT WITH US
Latest Video
Catalyst for Change: Sustainable and Efficient Flow Control for the Chemical Industry
Expressions of interest (EoI) are being sought by leading research organisation @UK_WIR for expert #partners ready to carry out targeted research projects to tackle critical #water #industry #problems.
https://fluidhandlingmag.com/news/latest-ukwir-projects-available-for-expression-of-interest/
#fluidhandling #pumps #pipelines #valves #technology
For an expanding #pig business in #Yorkshire that needed to meet environmental permitting regulations, A-Consult has completed the installation of a new 2200 m3 concrete slurry tank, together with a pump and mixer, installed by @Landia.
https://fluidhandlingmag.com/news/new-pig-slurry-store-with-pump-and-mixer-works-wonders-for-farmers-crops/
#fluidhandling
#Dŵr Cymru Welsh Water (DCWW) has signed a three-year #agreement with industrial artificial intelligence (AI) specialist Samotics for the on-going predictive condition monitoring of critical #wastewater assets across its estate.
#fluidhandling #pumps