Archive News
Other
Other
Hayward Flow Control has added PVC and CPVC FLV Series bag filters to its range of thermoplastic filtration products.
The new PVC and CPVC FLV Series are available in Size 1 (16") and Size 2 (32") vessels with True-Union design for multiple end connection sizes and types allowing for quick and flexible installations.
Made from PVC or CPVC materials, the FLV Series products are well-suited for…
Read More »
Read More »
Other
Renold Couplings’ Hi-Tec range of pilot bored RB rubber-in-compression couplings are now available ‘off the shelf’.
Used across a variety of production industries, the Hi-Tec RB coupling transmits torque using compressed rubber elements to dampen vibration and eliminate backlash.
This results in the efficient operation of the drive train, while removing the risk of failure and…
Read More »
Read More »
Other
Radco Industries, a global manufacturer of high quality heat transfer fluids and specialty lubricants for the military sector, has added a methylethylated aromatic mixture to its line of synthetic and petroleum based heat transfer fluid products.
This latest formulation will be manufactured and sold as Xceltherm SST.
Testing performed under the recently developed ASTM 6743, known as the…
Read More »
Read More »
Other
Watersprint, Swedish water technology company, and Seoul Viosys, a Korean UV LED firm, are planning a partnership to provide a drinking water purification system to Bangladesh.
Today a large section of the population in Bangladesh uses arsenic-contaminated water for drinking and cooking.
Water purification products and systems based on Watersprint's water control technology make it possible…
Read More »
Read More »
Other
LumaSense Technologies has introduced its next generation petrochemical infrared sensor, the Pulsar 4 for optimisation of sulphur recovery processes.
The Pulsar 4 is LumaSense’s latest addition to its E2T line of petrochemical infrared sensors.
Oil and gas operations are heavily dependent on combustion-based processes to supply the world’s growing energy needs.
The Pulsar 4 is…
Read More »
Read More »
Other
Torishima Pumps, of Osaka, Japan, manufactures centrifugal pumps for a wide range of applications and is the parent company for Dubai based Torishima Service Solutions.
The Dubai company provides a pump overhaul, maintenance, and emergency breakdown service for the parent company across the Middle East region.
The Torishima pumps are often used in water transmission, power plants and…
Read More »
Read More »
Other
The German bearing designer Schaeffler has introduced its latest FAG Generation C deep groove ball bearings into the Australian market.
The bearing range offers 50% less noise, 35% less friction, and reduced energy consumption compared to conventional technology, the company says.
Additionally, FAG Generation C bearings also reduce maintenance and eliminate dust ingress in machinery used in…
Read More »
Read More »
Other
Ideal Clamp Products has added new sizes to its contractor pack bags line for the Ideal-Tridon brand of worm gear, hose, and specialty clamps.
SAE sizes 36, 48, and 64, are now available in the twenty-five packs, which were designed with the contractor or big jobs in mind.
All Ideal-Tridon stainless steel hose clamps are made in the US and are Uniform Plumber Code (UPC) certified.
The durable…
Read More »
Read More »
Other
Pump manufacturer and system integrator Lewa, through its Singaporean subsidiary LEWA-Nikkiso Singapore, has recently fabricated and installed its largest chemical injection module ordered to date on a Brazilian floating production storage and offloading (FPSO) unit off the coast of Singapore.
With dimensions of 21.3x20x10m and an estimated operating weight of 714 tonnes, the complete module…
Read More »
Read More »
Other
Endress+Hauser has introduced the Liquiline System CA80PH orthophosphate analyser for monitoring water treatment processes.
The CA80PH is available in four measuring ranges, two of which use the standard molybdenum (blue method; DIN EN 1189) for low range measurement down to 50ug/L and two use the molybdate vanadate method (yellow method) for high range measurements up to 50 mg/L.
The analyser…
Read More »
Read More »
Other
Veolia Water Technologies has launched Package Exelys, a standard range of continuous thermal hydrolysis units for small to medium sludge digestion plants.
Thermal hydrolysis is a well proven pre-treatment technology for sludge digesters that increases digester throughput, pasteurises the sludge, enhances biogas production, and reduces the final biosolids volume for disposal.
Veolia’s…
Read More »
Read More »
Other
Honeywell Process Solutions (HPS) has released a key enhancement to its UniSim design and simulation software designed to help manufacturing facilities improve safety and reduce capital expenditures for both new and existing installations.
The new UniSim Design Blowdown Utility, designed specifically for oil and gas, petrochemical, and chemical industry applications, assists in…
Read More »
Read More »
Other
Reducing energy consumption is just one part of an industrial company's energy management strategy, as it must also source or generate its energy competitively, while taking account of CSI and green initiatives which may affect the energy mix.
This situation opens up the requirement for a solution that can make complex purchasing and management decisions far easier.
For instance, what appears to…
Read More »
Read More »
Other
KSB Aktiengesellschaft, a German pumps and valves manufacturer, will present a new kind of low-speed submersible mixer for use in waste water treatment and biogas production.
The new Amaprop 1380 can serve as a back-up mixer, scum breaker, or flow accelerator and it can be used alone or in combination with larger mixers.
The new mixer for biogas plants has a hard-wearing propeller…
Read More »
Read More »
Other
Increasing energy efficiency through the adoption of readily available wastewater management technologies can slash related emissions by nearly half, according to a new study released today by Xylem, a global water technology company.
The analysis further concludes that 95% of the electricity-related emissions abatement can be achieved at negative or neutral cost.
Powering the Wastewater…
Read More »
Read More »
Other
Minnesota Rubber and Plastics (MRB) has introduced Quniton, a new family of permanent, highly lubricious materials.
Quniton was developed to meet a market need for a high-performance lubricious product with permanent, low coefficient of friction (CoF) surface properties.
The material is suitable for a variety of applications in markets such as water, power, transportation, medical, and…
Read More »
Read More »
Other
In many industries, such as food and beverage and pharmaceuticals, it is essential that all equipment is able to satisfy the most stringent cleanliness requirements.
Advantech has released a new fully sealed IP69K-rated stainless steel multi-touch panel PC for use in such applications.
The new 21.5” widescreen IPPC-5211WS touch-panel computer is the latest model to use the Intel Celeron…
Read More »
Read More »
Other
Indeck Power Equipment has redesigned its 75,000pph superheat watertube boilers to save in fuel costs and provide higher efficiency while improving operations.
Many heavy processing industries like petroleum, chemical, food, and pulp/paper rely on superheated steam to accomplish their production.
The 75,000pph superheat 'O' type boilers are constructed in accordance with ASME code and perform at…
Read More »
Read More »
CONNECT WITH US
Latest Video
Catalyst for Change: Sustainable and Efficient Flow Control for the Chemical Industry
Andy Burnham, the former editor of @BulkDistributor magazine which forms part of the @FluidHandIntl stable of publications, has been formally sworn in as the new Prime Minister of the United Kingdom.
https://fluidhandlingmag.com/news/ex-editor-andy-burnham-sworn-in-as-new-uk-prime-minister-after-starmer-steps-down/
#fluidhandling #PM #AndyBurnham
#Kent has announced its continued support of #OXEA Corporation through a long-term Engineering Services Agreement and the award of detailed engineering services for a major specialty chemicals project at OXEA’s Bay City facility.
https://fluidhandlingmag.com/news/kent-awarded-epcm-services-for-major-oxea-specialty-chemicals-project/
#fluidhandling #pumps
@Hydrolevel_Company, a leading manufacturer of temperature and liquid level controls, has highlighted its Steam Pro Kit, a low water cut-off kit designed specifically for steam boiler gauge glass attachments.
https://fluidhandlingmag.com/news/hydrolevel-highlights-steam-pro-kit-for-upgrading-mechanical-low-water-cut-offs/
#fluidhandling #technology #water #systems