![](https://fluidhandlingmag.com/wp-content/uploads/2014/11/latestnews.jpg)
Oct 28, 2015
Xylem launches new Lowara 1300 submersible pump range
Archive News
Oct 28, 2015
Other
Endress+Hauser has introduced the Liquiline System CA80PH orthophosphate analyser for monitoring water treatment processes.
The CA80PH is available in four measuring ranges, two of which use the standard molybdenum (blue method; DIN EN 1189) for low range measurement down to 50ug/L and two use the molybdate vanadate method (yellow method) for high range measurements up... [Read More]
Archive News
Oct 27, 2015
Other
Veolia Water Technologies has launched Package Exelys, a standard range of continuous thermal hydrolysis units for small to medium sludge digestion plants.
Thermal hydrolysis is a well proven pre-treatment technology for sludge digesters that increases digester throughput, pasteurises the sludge, enhances biogas production, and reduces the final biosolids volume for disposal.
Veolia’s... [Read More]
Archive News
Oct 27, 2015
Other
Honeywell Process Solutions (HPS) has released a key enhancement to its UniSim design and simulation software designed to help manufacturing facilities improve safety and reduce capital expenditures for both new and existing installations.
The new UniSim Design Blowdown Utility, designed specifically for oil and gas, petrochemical, and chemical industry... [Read More]
Archive News
Oct 26, 2015
Pumps
Energy Recovery (ER), a Californian pressure energy technology provider for industrial fluid flows, has entered into a 15-year deal with Schlumberger Technology Corp, providing exclusive rights to ER’s VorTeq hydraulic pumping system.
The VorTeq system is the first hydraulic fracturing manifold (‘missile’) built to isolate hydraulic fracturing pumps from... [Read More]
Archive News
Oct 23, 2015
Valves
Aberdeen, Scotland-based EnerMech has invested ZAR 5.3 million (£250,000) to provide a door-to-door valves service for South Africa’s industrial services and energy industries.
The international mechanical engineering group has equipped two mobile PSV valves testing rigs capable of delivering valve certification and servicing within a 2,000km radius of Cape... [Read More]
Archive News
Oct 22, 2015
Other
Reducing energy consumption is just one part of an industrial company's energy management strategy, as it must also source or generate its energy competitively, while taking account of CSI and green initiatives which may affect the energy mix.
This situation opens up the requirement for a solution that can make complex purchasing and management decisions far easier.
For... [Read More]
Archive News
Oct 21, 2015
Other
KSB Aktiengesellschaft, a German pumps and valves manufacturer, will present a new kind of low-speed submersible mixer for use in waste water treatment and biogas production.
The new Amaprop 1380 can serve as a back-up mixer, scum breaker, or flow accelerator and it can be used alone or in combination with larger mixers.
The new mixer for biogas plants has... [Read More]
Archive News
Oct 21, 2015
Pumps
Netzsch Pumpen & Systeme has expanded its range of progressing cavity pumps and rotary lobe pumps with a three-model series of compact screw pumps, the Notos two-, three-, and four-spindle models.
Depending on the type, they are suitable for non-lubricating substances at high pressures up to 80 bar and temperatures up to 300°C.
They thereby cover a wide range of... [Read More]
Archive News
Oct 20, 2015
Other
Increasing energy efficiency through the adoption of readily available wastewater management technologies can slash related emissions by nearly half, according to a new study released today by Xylem, a global water technology company.
The analysis further concludes that 95% of the electricity-related emissions abatement can be achieved at negative or neutral cost.
Powering... [Read More]
Archive News
Oct 20, 2015
Pumps
Amarinth, a global centrifugal pump and associated equipment provider to the oil and gas, petrochemical, chemical, industrial, and renewable energy markets, has secured a $1.5 million (€1.3 million) order from Petrofac for 12 API 610 OH2 super duplex pumps with Plan 53B seal support systems.
The products will be delivered to a produced water treatment plant that will... [Read More]
Archive News
Oct 19, 2015
Pumps
The Swiss pump manufacturer CP Pumpen has released a new magnetic drive pump, the MKP 250-200-315, bringing the MKP series to larger volume pumping applications.
‘The demand for pumps with a large flow volume has increased in the past. With a volume of up to 750m3/h, the new MKP is complementing our series with a size that is important for the market,’ says... [Read More]
Archive News
Oct 16, 2015
Pumps
German pump manufacturer Börger has introduced the new Onixline pump range for high pressure applications.
Designed with flow-simulation software, the Onixline range can handle demanding high pressures up to 16 bar in applications including waste, chemical, oil, offshore, paper/pulp, and sugar.
Available with interchangeable cartridge seals to suit application-specific... [Read More]
Archive News
Oct 16, 2015
Pumps
Hansa-TMP, an Italian hydraulics company, has released the TPV 1500 variable displacement closed loop axial piston pump, developed at the company’s new Mechatronics Research Centre.
The TPV 1500 series pumps feature displacement of 17-21cm3/n and a peak pressure of 400 bar, making one of the top performers in its categoty, Hansa-TMP says.
The high pressure and displacement... [Read More]
Archive News
Oct 15, 2015
Flowmeters
Fluidwell, a Dutch liquid management instrumentation provider, has launched its E-series of explosion-proof flow computers.
This range of explosion-proof indicators, totalizers, and monitoring systems are designed to be used in harsh and difficult hazardous area applications.
Eric Rath, general manager of Fluidwell in Netherlands, says the E-series is distinguished by... [Read More]
Archive News
Oct 15, 2015
Other
Minnesota Rubber and Plastics (MRB) has introduced Quniton, a new family of permanent, highly lubricious materials.
Quniton was developed to meet a market need for a high-performance lubricious product with permanent, low coefficient of friction (CoF) surface properties.
The material is suitable for a variety of applications in markets such as water, power, transportation,... [Read More]
Archive News
Oct 14, 2015
Valves
AS-Schneider, an industrial valve specialist, has developed a customised manifold for the crude oil industry based on its VariAS range.
The VariAS-Block is equipped with a swivelling adapter, which enables the position of the whole pressure hook-up to be flexibly varied, making the valves and pressure gauge easily accessible.
The measuring instrument is mounted directly... [Read More]