News
Pumps
The full line of air operated double diaphragm (AODD) pump's from Yamada are now available from PumpScout after the two companies formed a partnership.
Yamada's product range is suitable for industrial, automotive fluid transfer, mining and chemical applications, among others.
The company offers several products for varying applications, such as its Electro Polished (EP) series for ultra-high…
Read More »
Read More »
Other
Nordson Asymtek, a manufacturer of dispensing and jetting technologies, has released a new dispensing system that is third-party certified for Class 100 cleanroom use.
The Spectrum S-820-C stainless steel device can be used in applications sensitive to contamination by submicron-sized particles, such as water-level packaging, or for dispensing a controlled amount of adhesive in precision…
Read More »
Read More »
Level Monitors
UK-based IVL Flow Control has introduced a new range of main reservoir level control valves which it claims provides better level control to traditional float valves.
Benefitting from a balanced single seat, the IVL Flow Control Level Float Valve (LFV) uses upstream pressure. This acts both on the lower part of the piston and the upper part of the plug, yielding two forces equal in magnitude…
Read More »
Read More »
Level Monitors
Dräger Safety UK has designed a product to aid the oil and gas industry to stay on top of testing and calibration of its portable gas detection instruments.
Its X-dock is an instrument calibration and management system which allows for complete automatic bump testing and calibration in seconds, using just a fraction of the test gas traditionally used in other systems.
Dräger claims the…
Read More »
Read More »
Pumps
Pump manufacturer Mouvex has launched new models of its Seal-less drive Eccentric Pumps.
The SLS4 and SLS8 have been designed for use in a range of pumping applications in the food, cosmetic and pharmaceutical industries, all of which require hygienic operations.
Both pumps incorporate a double wall bellows into the design, along with monitoring that is done by pressure switch. By mounting the…
Read More »
Read More »
Pumps
Mouvex, a manufacturer of positive displacement pumps, vane compressors, screw compressors and hydraulic coolers, has launched new models of its Seal-less Drive Eccentric Disc pumps.
These SLC4 and SLC8 pumps have been designed for use in general industry applications, as well as the handling of numerous chemical-based compounds, including isocyanates, polyols, additives, solvents, glues…
Read More »
Read More »
Pumps
An electric utility in Vermont, US is to introduce special pumps to aid its customers during both summer and winter months.
Green Mountain Power’s (GMP) plan is designed to help consumers reduce costs across a 12 month period.
It is believed the cold-climate heat pumps GMP will use are ductless heating systems that also provide air conditioning during hot weather. In cold weather, the…
Read More »
Read More »
Flowmeters
Rotork Fairchild, a member of the Rotork group of flow control companies, has increased the high pressure capacity of its leak-free pneumatic regulators for instrument and industrial control applications with the introduction of a new HPP range.A companion to the recently announced HPD diaphragm style range of regulators, the new HPP (High Pressure Piston) range incorporates a piston design to…
Read More »
Read More »
Valves
Franklin Valve and Microfinish Valves of Karnataka, India have entered into a technology license agreement.
Under the agreement, Microfinish will manufacture and sell Franklin's Duraseal DBB Plug valve in India, Pakistan, Bangladesh, Sri Lanka and Myanmar under the Microfinish brand.
This relationship will enable Franklin and Microfinish to benefit from greater scale and global opportunities,…
Read More »
Read More »
Pumps
Viessmann has launched a new line of brine/water heat pumps, offering outputs from 59-250kW.
The Vitocal 300-G Pro range is a development of the company's Vitocal 300-G heat pump series. Maximum output can be increased almost five times, to 1,200kW, when used in a cascade. Seven outputs are now available: 90 and 120kW in a single stage, and 90, 120, 150, 180 and 250kW in two stage units.
The new…
Read More »
Read More »
Pumps
Pump manufacturer SEI Industries has launched a new line of standardised pumps to help support remote site operations in need of a ready inventory.
The company's pump portfolio includes:• Aviation refuelling pumps with jet fuel filtration coalescer/separator and totalising flow meter. Available in 50 and 100 gpm models, each pump option is housed on a skid for shipping and…
Read More »
Read More »
Flowmeters
Endress and Hauser has released its Proline Promag 200 electromagnetic flow meter, a two-wire magmeter that it claims offers the same measuring performance as four-wire magmeters.
The Promag H200 is available in line sizes of 1/12 to 1” and Promag P200 is available in line sizes of 1/2 to 8” for measuring the flow rates of conductive fluids with an accuracy of ±0.5% of range…
Read More »
Read More »
Other
US-based KTR has revealed successful results after testing several series of couplings for clean room applications.It worked with the Fraunhofer Institute for Production Technology and Automation (IPA) to prove and certified its Radex-NC, Toolflex and the Rotex GS series couplings release few particles, making them viable for clean room technology.Clean room technology refers to a processing…
Read More »
Read More »
Flowmeters
Municipal and industrial water flow measurement application solution provider McCrometer has developed an electromagnetic flow meter with accuracy to ±0.5% of reading.The FPI Mag and Ultra Mag flow meters have both obtained CSA certification and are now ISO9001:2008 certified too.The company claims the FPI Mag is the industry’s only available hot tap full profile insertion flowmeter.…
Read More »
Read More »
Valves
Automation technology supplier Fetso has introduced a new force pilot operated solenoid valve that can be used with water, air and neutral media.
The VZWF uses small solenoids to control high pressures with large nominal diameters. The units can switch at pressures from 0bar and close automatically in the case of a pressure loss in the circuit. These valves can be applied in closed media…
Read More »
Read More »
Level Monitors
Cynergy3 Components has launched a range of liquid level sensors for various applications, including process storage tanks, vending machines, steam baths, saunas, commercial washing machines and evaporator units.
The TSF range includes two series: TSF40 and TSF70. The TSF40 series is a further development of Cynergy3's RSF40 series liquid level sensors. It is a compact level switch with…
Read More »
Read More »
Valves
Badger Meter has added to its portfolio with a new high pressure control valve, designed to operate on applications with up-stream pressures of up to 60,000 psi.
The type HP-60 control valve utilises a 17-4 PH body along with a Stellite inner valve assembly. The HP-60 valve can be used in industrial research and process pilot plants on liquids and gases, with typical applications being chemical…
Read More »
Read More »
Other
US-based Oven Industries’ claims its 5R7-001 temperature controller creates a seamless transition between heating and cooling devices, as it serves as the commander of thermoelectric modules.
With a bi-directional or unidirectional H-bridge configuration, the temperature controller has many benefits. The included user-friendly PC software makes it quick and simple for users to change any…
Read More »
Read More »
CONNECT WITH US
Latest Video
Catalyst for Change: Sustainable and Efficient Flow Control for the Chemical Industry
Andy Burnham, the former editor of @BulkDistributor magazine which forms part of the @FluidHandIntl stable of publications, has been formally sworn in as the new Prime Minister of the United Kingdom.
https://fluidhandlingmag.com/news/ex-editor-andy-burnham-sworn-in-as-new-uk-prime-minister-after-starmer-steps-down/
#fluidhandling #PM #AndyBurnham
#Kent has announced its continued support of #OXEA Corporation through a long-term Engineering Services Agreement and the award of detailed engineering services for a major specialty chemicals project at OXEA’s Bay City facility.
https://fluidhandlingmag.com/news/kent-awarded-epcm-services-for-major-oxea-specialty-chemicals-project/
#fluidhandling #pumps
@Hydrolevel_Company, a leading manufacturer of temperature and liquid level controls, has highlighted its Steam Pro Kit, a low water cut-off kit designed specifically for steam boiler gauge glass attachments.
https://fluidhandlingmag.com/news/hydrolevel-highlights-steam-pro-kit-for-upgrading-mechanical-low-water-cut-offs/
#fluidhandling #technology #water #systems