Archive News
Other
Semi-Gas, a division of Applied Energy Systems, has introduced the Xturion liquid push delivery system (LPX) for the precise delivery and handling of ultra-high purity liquids.
The fully automatic system, operated by a GigaGuard PLC controller, features a 9” colour touchscreen and user-definable alarms and set points.
The system’s liquid-tight, ducted enclosure includes…
Read More »
Read More »
Pumps
Hillenbrand has entered into a definitive agreement to acquire Abel Pumps and certain of its affiliates (Abel) from Roper Technologies for €95 million in cash.
The transaction is expected to close within a month, subject to regulatory approval and customary closing conditions.
Based in Buchen, Germany, Abel is a globally-recognised manufacturer of diaphragm pumps.
The company…
Read More »
Read More »
Pumps
Morrison Pump Company, based in Florida, US, has received an order to supply its new moving bed biofilm reactor (MBBR) recycle pumps for the Hopewell Regional Wastewater Treatment Facility Project in Virginia.
The horizontal axial flow pumps are part of the overall $70 million (€62.3 million) design build project awarded to Hopewell Nutrient Partners, a joint venture between HDR Engineering…
Read More »
Read More »
Pumps
Grindex, an electrical submersible pumps manufacturer, has launched Grindex Milli, a low-suction pump built on Micro drainage pump.
The Micro and Milli share all the main components and functions for the wear parts.
Due to the addition of a non-return valve to the hydraulic parts to prevent a backflow, the Milli can pump down to a level as low as a few millimeters.
The Milli was designed to solve…
Read More »
Read More »
Other
Within its HRC N series, EagleBurgmann has launched the optimised double seal HRC3300N that has the same mounting dimensions with the rest of the series and which uses some of the non-variable parts from the predecessor HRC3000N.
The seal uses a new stationary seat that does not require binding, which, together with improvements to the seal on the atmosphere side, makes the HRC3300N more service…
Read More »
Read More »
Other
Aquatech, a global water treatment solutions provider, has introduced the AquaR2RO membrane process designed for use in facilities requiring zero liquid discharge (ZLD) or very high recovery.
The AquaR2RO process features a configuration of membranes engineered to cost-effectively treat waters that are difficult to treat with conventional membranes processes.
Due to its distinctive design,…
Read More »
Read More »
Other
Xylem, a global water technology company, has launched a new high efficiency, low-speed, submersible wastewater mixer.
Unlike conventional submersible mixers, Xylem’s Flygt 4320 offers built-in speed regulation to optimise operators’ control over the mixer’s thrust, thereby enabling continuous process results and reducing energy costs up to 50%, according to Xylem…
Read More »
Read More »
Pumps
KMT Waterjet Systems is set to launch a new series of high pressure pumps for waterjet cutting – the STREAMLINE SL-VI.
The new pump models are based on four frames in different sizes and provide a range of configuration possibilities.
The SL-VI series offers various pressure ranges, motorisations, and configuration features so that the pump can be tailored to the application it is needed…
Read More »
Read More »
Pumps
Sulzer has signed a worldwide framework agreement with Veolia Environnement for three years.
The agreement makes Sulzer a preferred supplier across the entire Veolia operations for submersible and dry well pumps, mixers, and dedicated services.
Sulzer was awarded the preferred supplier status due to its range of premium efficiency products.
The product offering from Sulzer also includes process…
Read More »
Read More »
Pumps
Pedrollo has released the new Tritus series of submersible grinder pumps.
The pumps feature cataphoretic coating for cast iron components, double mechanical seals in built-in oil chamber, and a stainless steel handle.
The Tritus also comes equipped with a high-grade grinder in the suction inlet.
This grinder, made of AISI 440C high-tempered stainless steel, can finely grind both solid parts as…
Read More »
Read More »
Valves
Bonomi North America has introduced a new series of high-performance butterfly valves
The new valves are designed for use in hydrocarbon and chemical processing, commercial and industrial heating, ventilation, and air conditioning, power generation, and other higher temperature and pressure applications.
They are built with an ISO 5211 mounting pad and square stem for direct-mount automation…
Read More »
Read More »
Other
An extended scope contract performed by Rotork has successfully delivered full automation of a flood alleviation scheme protecting the historic town of Cardigan in West Wales, UK.
The project involved replacing unreliable actuators, installing a PLC control cabinet, and interfacing with the existing river level sensor and telemetry system.
The flood alleviation scheme on the River Mwldan was…
Read More »
Read More »
Valves
A new ultra-miniature, high density interface (HDI) two-port latching solenoid valve has been released from Lee Products.
The valves are well-suited for OEM applications demanding ultra-low energy consuming components that generate minimal heat and are as compact as possible.
They weigh less than 2.5g and measure at 27mm x 7.1mm, which results in smaller manifolds.
For example, the HDI two-port…
Read More »
Read More »
Other
Honeywell has announced its newest version of Experion LX, a distributed control system (DCS) designed specifically for small- and mid-sized companies.
Built on the Experion process knowledge system (PKS), Experion LX includes a number of capabilities to support midsized chemical processing, industrial power, biofuels, pharmaceutical, food and beverage, and water and wastewater…
Read More »
Read More »
Other
Sarcos, a global manufacturer of advanced robotic systems, has announced its Guardian S snake robot, a first-of-its-kind robotic unmanned ground vehicle (UGV).
The Guardian S is the first-ever commercially available energetically autonomous snake robot, developed after years of research and in-field trials, and it is protected by more than 50 issued patents.
It is the newest addition to the…
Read More »
Read More »
Valves
Nordson EFD, a precision fluid dispensing systems manufacturer, has introduced a new fast and accurate piezoelectric jetting technology.
EFD’s new Pico Pulse valve and Pico Touch controller make it possible to dispense exact, repeatable micro-deposits as small as 0.5nL at up to 500Hz continuous, with 1500Hz maximum bursts.
The Pico Pulse non-contact jet…
Read More »
Read More »
Flowmeters
UK flowmeter specialist Litre Meter has supplied a number of VFF flowmeters for the Martin Linge field development project in the North Sea.
Litre Meter has supplied 14 positive displacement flowmeters including MF30, HF20, VFF8, and V125 models, all constructed in Duplex stainless steel.
The meters were shipped to a Samsung/Technip consortium for use in a chemical injection skid on the…
Read More »
Read More »
Other
The global submersible pump market is set to grow at a compound annual growth rate of 6.7% over the period of 2015-2019, according to a new market study.
In the study Technavio, a global technology research and advisory company, says the boost in the sale of submersible pump worldwide is because of the growth in the wastewater management industry, which is growing at a fast rate in…
Read More »
Read More »
CONNECT WITH US
Latest Video
Catalyst for Change: Sustainable and Efficient Flow Control for the Chemical Industry
Regulation has played an important role in shaping the UK pump industry, but the pace, scope and complexity of change we are now experiencing marks a significant shift, writes Wayne Rose, Chief Executive, British Pump Manufacturers Association (#BPMA).
https://fluidhandlingmag.com/news/navigating-change-managing-regulatory-complexity-in-the-uk-pump-industry/
Andy Burnham, the former editor of @BulkDistributor magazine which forms part of the @FluidHandIntl stable of publications, has been formally sworn in as the new Prime Minister of the United Kingdom.
https://fluidhandlingmag.com/news/ex-editor-andy-burnham-sworn-in-as-new-uk-prime-minister-after-starmer-steps-down/
#fluidhandling #PM #AndyBurnham
#Kent has announced its continued support of #OXEA Corporation through a long-term Engineering Services Agreement and the award of detailed engineering services for a major specialty chemicals project at OXEA’s Bay City facility.
https://fluidhandlingmag.com/news/kent-awarded-epcm-services-for-major-oxea-specialty-chemicals-project/
#fluidhandling #pumps