Latest News
If you would like to use our search facility - please log in or register above.
The results below are recent news items.
The results below are recent news items.
Pipelines
Shell Brasil, a subsidiary of Shell plc, announced the start of production at the floating production storage and offloading facility (FPSO) Alexandre de Gusmão in the Mero field in the Santos Basin offshore Brazil.
As part of the Mero-4 project, the FPSO will be connected to 12 wells, with an operational capacity of 180,000 barrels of oil production and 12 million cubic meters of gas…
Read More
Read More
OHL Gutermuth has developed a valve that is specially designed for use in SRU applications.
The automated OHL 4-way valve CDM can also be used in systems that utilise SmartSulf® technology to achieve a sulphur recovery rate of up to 99.7%.
Because of the presence of hydrogen sulphide and sulphur dioxide, the processes in sulphur recovery units are highly complex and require valves that are…
Read More
Read More
Pipelines
IMI has provided a 2MW PEM electrolyser for the upcoming Hydrogen Valley project in Lamezia Terme, Italy.
The installation is set to be built on the brownfield site of the former SIR industrial complex and will produce 400 Nm³/h of green hydrogen at 40 barg, equivalent to approximately 36 kg/h.
Following the completion of the preliminary design phase and the acquisition of necessary permits…
Read More
Read More
As more research stations pop up across Antarctica, the need for pumps and pumping solutions is greater than ever.
In addition to the operation of nearly 100 research stations throughout the year, many countries are also exploring the use of renewable energy on Antarctica.
Additionally, each research station needs to address fuel and water needs, as well as delivery of chemicals and fluids…
Read More
Read More
Pipelines
Pennine Pneumatic Services has showcased Atlas Copco’s energy efficient blowers and compressors that is supporting the UK water sector’s pathway to net-zero.
Atlas Copco’s range includes the ZS3 and ZS4 oil-free rotary screw blowers, engineered with an optimised internal compression process that delivers a consistent, oil-free air stream critical for effective aeration.
These models are…
Read More
Read More
Pipelines
Wood has been selected to provide operations and maintenance solutions for MTR Carbon Capture at the world’s largest membrane-based carbon capture plant in Gillette, Wyoming.
The facility, which is based at the Wyoming Integrated Test Center (ITC) and managed by the University of Wyoming, is part of the US Department of Energy’s large-scale pilot carbon capture program which aims to advance…
Read More
Read More
Rotork is excited to announce that Rotork Site Services is now officially Rotork Service.
The decision to rebrand reflects its commitment to growth and ambition to become a stronger, more unified global service provider.
The goal is to evolve beyond traditional site-based services and offer a Full Lifecycle Experience encompassing all stages of the customer journey, from installation and…
Read More
Read More
Pumps
Rockwell Automation has announced that its industrial computing technology is delivering critical data-based AI instructions for more precise water-turbine control at PVO-Vesivoima’s hydroelectric plants in Finland.
The control solution uses real-time operational data and applies machine learning and AI to identify the interactions that determine the frequency of the electricity grid.
The…
Read More
Read More
Lutz-Jesco, a leading provider of chemical dosing technology, has acquired the FXM line of peristaltic metering pumps from Valmet.
This strategic move enhances Lutz-Jesco's portfolio and strengthens its global presence in industrial and municipal fluid handling markets.
The FXM series, formerly branded under Flowrox and known for its durability and ability to handle abrasive and viscous…
Read More
Read More
Metso is launching media handling systems, consisting of media pumping, media charging and media lifting systems.
These standalone solutions are designed to cost-effectively facilitate the fast and safe handling of stirred mill media during shutdown processes for mill maintenance activities.
Metso’s pre-engineered media handling solutions deliver rapid, safe and scalable options for…
Read More
Read More
Pipelines
ORLEN Venture Capital has invested in Hystar, a Norwegian manufacturer of high-efficiency proton-exchange-membrane (PEM) electrolysers for large-scale, zero-emission hydrogen production.
Hystar’s patented design uses membranes up to 10 times thinner than those in conventional units, materially improving efficiency and lowering the cost of hydrogen generation.
The technology dovetails with…
Read More
Read More
Finish Thompson Inc. (FTI) will be introducing its new UCP Series ANSI-dimensional magnetic drive centrifugal pump.
The UCP serves as a drop-in replacement for any manufacturers’ ANSI-dimensional pump, significantly reducing users’ cost of ownership.
The new UCP Series is ideal for a variety of surface finishing applications, including plating, anodizing, etching and pickling.
It…
Read More
Read More
PSB Industries, a specialist in the design of systems for dehydrating and purifying gasses and liquids, has highlighted its Siloxane Removal packaged skid - an advanced gas purification system.
This solution is engineered to meet the rigorous demands of gas processing across diverse industries.
The Siloxane Removal packaged skid offers a dependable method for eliminating siloxanes and…
Read More
Read More
Shell Lubricants’ immersion cooling fluids have become the first to receive official certification from a major chip manufacturer, allowing its innovative products to be used with confidence in data centres worldwide.
Jason Wong, global executive vice-president, Shell Lubricants, said: “Upgrading existing air-cooling methods with immersion fluids can reduce data centre energy use by up to…
Read More
Read More
Expansion works at the Burntwood Sewage Treatment Works in the UK are expected to be completed ahead of time, with two additional treatment stages constructed.
Severn Trent Water contracted the RSK Group company’s MWH Treatment for the upgrade works. The MWH team suggested an early maturation process to keep the project on track so that it could deliver the necessary assets and overall site…
Read More
Read More
Pipelines
Thames Water is improving its Coppermills Water Treatment Works, in Walthamstow, in the UK through a seven-year £400 million (€360 million) investment programme.
The site is an integral part of Thames Water’s supply network to London, and this significant upgrade will enhance the site’s efficiency, reliability and ability to serve London’s growing population.
Upgrades include a new…
Read More
Read More
Watson-Marlow Fluid Technology Solutions (WMFTS) has been showcasing its product range for chemical metering and dosing applications.
The Qdos range consists of six pumps—20, 30, 60, 120, CWT and H FLO—to fulfil chemical metering and dosing requirements.
Chemical dosing systems with Qdos peristaltic pumps are used at major water and wastewater treatment plants around the UK.
The…
Read More
Read More
NETZSCH Pumps USA has showcased its TORNADO® T1 Generation F pump - designed to produce high flow at low to medium pressures.
It is ideal for various industrial applications, said the company. The TORNADO® T1 Generation F pump can handle a wide range of viscosities, solids, temperature, abrasion and corrosive/acidic process fluids and environments.
The TORNADO® T1 Generation F pump is…
Read More
Read More
CONNECT WITH US
Latest Video
Catalyst for Change: Sustainable and Efficient Flow Control for the Chemical Industry
Expressions of interest (EoI) are being sought by leading research organisation @UK_WIR for expert #partners ready to carry out targeted research projects to tackle critical #water #industry #problems.
https://fluidhandlingmag.com/news/latest-ukwir-projects-available-for-expression-of-interest/
#fluidhandling #pumps #pipelines #valves #technology
For an expanding #pig business in #Yorkshire that needed to meet environmental permitting regulations, A-Consult has completed the installation of a new 2200 m3 concrete slurry tank, together with a pump and mixer, installed by @Landia.
https://fluidhandlingmag.com/news/new-pig-slurry-store-with-pump-and-mixer-works-wonders-for-farmers-crops/
#fluidhandling
#Dŵr Cymru Welsh Water (DCWW) has signed a three-year #agreement with industrial artificial intelligence (AI) specialist Samotics for the on-going predictive condition monitoring of critical #wastewater assets across its estate.
#fluidhandling #pumps