A government agency that tried three different types of pumps to combat oil-based contamination in the fight against sea pollution, finally found the answer with a mobile rotary lobe pump, made by Börger. Searching for a reliable, solids-resistant mobile pump, which could also be used in clean-up operations as a transfer pump for discharging portable tanks or other collection... [Read More]

TotalEnergies has launched an integrated Front-End Engineering and Design (FEED) for a Papua LNG project. Following pre-FEED studies, in order to maximise synergies and minimise the costs, Papua LNG partners have selected a concept including four electrical LNG trains (e-trains) with a total capacity of 4 Mt/y. These trains will be built within the existing liquefaction... [Read More]

More than £14 million (€15.8 million) is being made available to accelerate the installation of heat pumps and heat networks across the UK as a new scheme launches to train thousands of installers. Over £9.7 million (€11 million) will go towards four projects based across the country, from Bristol to Cambridgeshire - helping cut costs of these low carbon technologies,... [Read More]

Celeros Flow Technology brand ClydeUnion Pumps has secured an agreement with EDF which will see it provide dedicated pump maintenance and spares services across the customer’s entire network. The multi-million euros contract cements the strategic lifecycle partnership between the two companies for a further 10 years. The new agreement was formalised at a signing ceremony... [Read More]

Circular Fuels has submitted formal planning permission plans for their first £150m waste-to-DME production plant at Teesworks, the UK’s largest and most connected industrial zone. renewable & recycled carbon DME is a sustainable, cost-effective and clean burning fuel that can help decarbonise liquefied petroleum gas (LPG) industry and off-grid energy sectors. Once... [Read More]

Wärtsilä will supply the engines for a large power plant to be installed in Latin America. The plant will provide baseload power to the grid, but the rapid start-up flexibility of the engines will enable it to take on a grid balancing role as the system’s share of renewable energy increases. The order, valued at more than €100 million, was placed by a major EPC... [Read More]

A Widethroat EZStrip progressive cavity pump made by Fluid Motion Solutions is playing a vital role in the processing of olives for a major producer in Andalucia, Spain. Designed to transfer highly viscous or bulky materials, the EZStrip Widethroat pump’s enlarged rectangular inlet (with a screw conveyor) assists the waste fruit into the pumping element as part of the... [Read More]

Alfa Laval has entered into an agreement with a subsidiary of CVR Energy Inc to supply processing systems for feedstock pre-treatment as the US-based refining company expands into biofuel production. Alfa Laval will supply pre-treatment systems, including pumps, separators, heat exchangers and agitators, to reduce contaminants in the feedstocks before conversion into... [Read More]

Amarinth has received an order from VWS Westgarth for two titanium API 610 OH2 pumps for use on the FPSO One Guyana - destined for Guyana’s Yellowtail development project. The development project consists of six drill centres and up to 26 production and 25 injection wells. Located about 200 km offshore Guyana, the deepwater wells will be tied back to the One Guyana... [Read More]

Valmet will deliver boiler conversions and emission reduction solutions for Veolia Group’s Hungarian subsidiary CHP-Invest Kft at its power plant in Oroszlány, Hungary. The order includes the conversion of two coal-fired boilers to bubbling fluidiSed bed combustion to enable the boilers to run mainly on biomass fuel. The order is included in Valmet’s orders received... [Read More]

Flowserve Corporation will support the construction of Aramco’s Jafurah project - one of the largest commercial unconventional gas fields being developed in Saudi Arabia. The company will supply over 400 pumps for the project. Flowserve is working with three engineering, procurement and construction (EPC) companies, who will utilise a diverse portfolio of pumps,... [Read More]

Honeywell and Johnson Matthey will work together to deploy low carbon hydrogen solutions. The companies will offer JM's innovative LCH™ technology, coupled with Honeywell's leading carbon capture technology to produce lower carbon intensity hydrogen (blue hydrogen) at scale. The demand for hydrogen solutions is on the rise with public policies and funding mechanisms... [Read More]

Topsoe has been chosen as technology provider to Ascension Clean Energy (ACE) as part of an industrial scale low carbon hydrogen-ammonia joint venture. The project by Clean Hydrogen Works (CHW), Denbury Carbon Solutions and Hafnia aims to deliver the 7.2 million metric tons of clean ammonia annually. ACE will use Topsoe’s integrated hydrogen and ammonia solutions,... [Read More]

Sulzer Chemtech is using its advanced separation technologies to enable the world’s first commercial scale e-methanol plant constructed by European Energy. The innovative facility in Kassø, Aabenraa, Denmark will produce 32,000 metric tonnes of carbon neutral fuels per year, helping to decarbonise the heavy transportation sector. European Energy is applying an innovative... [Read More]

Alfa Laval will supply pre-treatment systems, consisting of various equipment such as separators, heat exchangers, pumps and agitators for a US-based renewable fuels and petroleum refining company. The agreement is with a subsidiary of CVR Energy and the aim is to supply processing systems for feedstock pre-treatment, part of a strategic investment in the refinery supporting... [Read More]

Valmet will supply a flue gas condensing process to Vantaa Energy’s new high-temperature incineration plant in Vantaa, Finland. The plant is designed to process household and industry waste that is classified as hazardous and not suitable for recycling. The order is included in Valmet’s orders received of the fourth quarter of this year. Its value will not be... [Read More]

Sulzer has successfully finalised an extensive modernisation project at its Kotka pump factory. The automation and digitalisation of the processes will take the production to a completely new level, cutting production throughput time by 93%. Sulzer has been manufacturing pumps in Kotka for 130 years. Now the company is entering a new era with the new, state-of-the-art... [Read More]