Product News
Weir Minerals has launched the new Multiflo Mudflo hydraulic submersible slurry pump.
Engineered for abrasive applications and large particle handling, the pump features a hydraulically driven wet-end specifically designed to efficiently and safely reprocess and relocate tailings ponds, maintain water retention dams and manage slimes and sludge ponds.
The innovative solution combines the…
Read More »
Read More »
Flowserve Corporation has announced the launch of a IoT service suite to help production facilities monitor their assets remotely.
This will help predict equipment failures before they happen and take preventive measures to avoid business disruptions.
RedRaven, the new platform supports any flow control equipment regardless of manufacturer, opening the door for companies to quickly realise the…
Read More »
Read More »
Engineers responsible for municipal ground or surface drinking water supplies will find the Cloud-ready LQ800 Multi-Channel Control System offers them a complete measurement and control solution that provides over 50 analytical measurements, as well as liquid flow, level and temperature data.
The highly intelligent and scalable eight-channel LQ800 Multi-Channel Controller is designed to operate…
Read More »
Read More »
Graco Inc, a fluid handling equipment manufacturer, has announced its new Husky 3300e electric double diaphragm pump.
The Husky 3300e pump transfers a wide variety of industrial fluids and offers plant managers high-volume fluid transfer (up 220 gpm) while drastically reducing power consumption.
Dan Purkat, worldwide product manager for process pumps at Graco, said: “The Husky 3300e pump was…
Read More »
Read More »
The Pipestoppers Division at Huntingdon Fusion Techniques HFT manufacture a range of inflatable stoppers for fast, reliable and safe stopping, blocking and testing of pipes, joints, channels, inlets and a number of other uses.
An export customer required a large stopper for blocking hot fumes from a chimney stack measuring 114 inches (2,896 mm) in diameter to carry out vital maintenance and…
Read More »
Read More »
Emerson has introduced the Fisher V280 full-bore trunnion-mounted ball control valve for severe and speciality pressure, flow and process control applications.
The valve provides dynamic process control by utilising a robust drive train unique to the market that is designed to guide the shaft and properly absorb energy.
Available attenuators for liquid and gas process fluids offer an…
Read More »
Read More »
Easier product selection and faster turnaround are two of the advantages customers can expect when they choose Celeros Flow Technology as their preferred supplier for reciprocating pumps.
The company has totally revised its reciprocating pumps portfolio to align it with current market conditions, reducing design complexity and making it simpler to match the pump to the application.
Bryan…
Read More »
Read More »
For many years, oxygen monitors and gas analysers have been used for weld purging.
They are specifically designed and calibrated for accuracy at atmospheric oxygen level but not for weld purging where accuracy is required when reading much lower oxygen levels.
Using the latest scientific knowledge and innovation, Huntingdon Fusion Techniques HFT has designed and manufactured the PurgEye Nano…
Read More »
Read More »
Neles is introducing a new versatile butterfly valve product range that enables easy configuration for an extensive range of applications in all process industries.
With its proven technology and state-of-the-art functionality, the product range offers superior process efficiency with a minimized environmental footprint.
The new range combines 45 years of experience from thousands of customer…
Read More »
Read More »
Fugitive emissions have become a worldwide concern, motivating governments to place tight restrictions on plants.
The industrial emissions Directive (IED) 2010/75/EU is the legislative framework that regulates emissions of industrial installations across the UK and the EU.
In the US, there have been several emission guidelines developed at local, state and federal levels, including the…
Read More »
Read More »
Many process plants have difficulty finding ideal installation points for flow measurement devices due to requirements for long length of inlet run and undisturbed flows.
The Prosonic Flow P 500 measuring system addresses these and other issues with its FlowDC function.
The device requires only minimal straight inlet runs and it can be installed directly onto the exterior of the pipe, so there…
Read More »
Read More »
When fluid handling applications require safe and reliable pumping of thin, low viscosity liquids, such as liquefied gases or refrigerants the new Dickow WPM Series offers a choice.
Available from pump specialists Michael Smith Engineers these new options of self-priming, horizontal, side-channel pumps are suitable for handling clean liquids without solids in chemical and petrochemical industry…
Read More »
Read More »
SEEPEX which is involved in design, manufacture and applications of progressive cavity (PC) pumps, macerators and digital technology, continues to extend its portfolio of maintain-in-place pump technologies.
The new patented BNM range of pumps with capacities up to 300 m3/hr and discharge pressures up to 48 bar can handle flowable to highly viscous products with a high dry solids content.…
Read More »
Read More »
Care is necessary when welding large diameter pipework in stainless, duplex, chrome steels, nickel alloys and zirconium.
When welding such reactive materials, they need to be purged of oxygen before, during and after welding, which can cause a huge expense when they are of a large diameter.
Weld purging experts Huntingdon Fusion Techniques (HFT) innovative QuickPurge Systems, which are…
Read More »
Read More »
Watson-Marlow Fluid Technology Group (WMFTG) has unveiled the next performance level in its range of Qdos chemical metering pumps.
Qdos Conveying Wave Technology (CWT) extends the capabilities of peristaltic pump technology and offers longer service life than traditional tube-based designs.
CWT also offers important advantages in water treatment applications - users will benefit from superior…
Read More »
Read More »
Flowrox, a leader in heavy‐duty industrial pumps, pressure filters, valves and instrumentation manufacturing, is releasing to the environmental technology world the Flowrox Plasma Oxidiser.
The Flowrox oxidiser is an effective non-thermal plasma technology for industrial water purification.
It destroys 90 to 99 % pharmaceutical residues from wastewater. Plasma generated oxidants effectively…
Read More »
Read More »
Titan Enterprises’ flow monitoring of refrigerant liquids using its 900 and 1000 series turbine flow sensor devices helps keep data storage cool.
A manufacturer and supplier of precision cold liquid flow-measurement devices, Titan’s standard and OEM custom flowmeter designs meet the demands of specialist coolant flow applications, where reliable and effective cooling arrangements are vital…
Read More »
Read More »
EnviroGear, part of PSG, a Dover company and manufacturer internal gear pumps, said its G Series Internal Gear Pump is now available with jacketing.
Specifically designed to enhance the G Series Pump’s temperature control and stability, these new jacketed pumps are suited to handle a variety of challenging applications such as carbolic acid, liquid sulfur, roofing manufacturing, general…
Read More »
Read More »
CONNECT WITH US
Latest Video
Catalyst for Change: Sustainable and Efficient Flow Control for the Chemical Industry
A new #separator, #pump and #mixer have greatly improved slurry handling at a popular village-based #dairy #farm in #Warwickshire in the #UK. #landia
https://fluidhandlingmag.com/news/new-separator-pump-and-mixer-bring-it-all-together-at-chesterton-house-farm/
#fluidhandling #pumps #valves #pipelines
Mike Easson, chief technology officer at @John_Crane, speaks to Fluid about how the company is rethinking engineering innovation to help operators meet rising performance expectations while hitting ambitious sustainability targets.
https://fluidhandlingmag.com/news/strategies-to-boost-performance/
#fluidhandling
#ERG, the leading supplier of #odour #control systems and industrial #gas cleaning & #thermal systems, has been awarded the coveted #King’s Award for Enterprise.
https://fluidhandlingmag.com/news/kings-award-shows-erg-moving-forward-with-growth-in-uk-and-asia/
#fluidhandling #technology #pumps #valves #success #award
https://fluidhandlingmag.com/news/kings-award-shows-erg-moving-forward-with-growth-in-uk-and-asia/