Product News
VorTek Instruments has released the Pro-V™ M24 multivariable vortex flowmeter.
This flowmeter offers accurate and reliable flow metering in a multivariable design.
The multivariable design incorporates a high-accuracy velocity sensor, a precision platinum RTD temperature sensor, and a solid-state pressure transducer.
The M24 can deliver volumetric flow, mass flow, temperature, pressure,…
Read More »
Read More »
The Oseco Safety Cartridge unites the bursting disc with the holder in a one-piece, welded design.
It solves the top three reported problems associated with the use of bursting discs - difficulties with installation, leaking, and the need for specialist knowledge for correct installation and maintenance.
The rupture disc is electron-beam welded between the inlet and outlet to form a…
Read More »
Read More »
Rheinhütte Pumpen has revealed that almost all of its series are now equipped with the i-ALERT2 monitoring system as standard.
The sensor mounted on the bearing bracket monitors the vibration of the pump and the temperature of the bearings.
If the pump exceeds the preset limits in two consecutive measurements, the unit goes into alarm mode and this is indicated by a red flashing LED on the…
Read More »
Read More »
Val-Matic’s American-BFV Butterfly Valve has had thousands of field installations in municipal, industrial and power applications throughout the world since its introduction in 1971.
With features including standard epoxy interior, continuous uninterrupted seating and Tri-Loc seat retention system, which allows for field adjustment and replacement without the need for special tools or epoxies,…
Read More »
Read More »
Titan Enterprises said its High Pressure Oval Gear (OG4) flowmeters provide a solution for oil and gas industry applications that require accurate and chemically resistant flow measurement device.
Benefiting from a compact, rugged design, Titan’s OG4 flowmeters operate reliably even at high pressures, providing long-term performance with minimal maintenance.
Furthermore, Titan’s OG4…
Read More »
Read More »
Atlas Copco has upgraded its 8 Series of air compressors to meet stringent emission standards for construction and road equipment.
In addition to greener operation, the compressors now feature innovative new technologies that help cut operating costs and improve productivity, with 25% less fuel consumption.
The updated 8 Series includes eleven models, some with inbuilt generators, ranging from…
Read More »
Read More »
Titan Enterprises said its turbine flowmeter range provides a useful tool for accurately measuring the flow of low viscosity fluids.
Classic turbine flowmeters use propeller type turbines in a closed circular conduit. The turbine is mounted on low friction bearings and its rotation is detected through the chamber wall by one of a variety of detector types.
These flowmeters have good linearity…
Read More »
Read More »
Baker Hughes has launched its next generation onshore composite flexible pipes to address corrosion challenges in the oil and gas sectors.
A key feature of the pipe is its proven spoolable design, making it easier, faster and more cost-effective to transport and install versus steel pipe – reducing installed costs by more than 20%.
Installation also requires fewer onsite support facilities…
Read More »
Read More »
Warren Controls has updated its ValveWorks programme to improve the sizing and selection process for globe and rotary control valves based on international standards.
The leading manufacturer of control valves and speciality fluid handling products, said the updates improved its ability to handle projects of greater complexity.
The programme now includes a CLONE feature which easily creates…
Read More »
Read More »
A selection of special centrifugal pumps by Bungartz have been included in the impeller.net pumpselector portal.
The pumps for individual industrial sectors are available for selection, configuration and customer requests.
The centrifugal pumps manufactured by Bungartz are available worldwide. The dry-run safe pumps are used in difficult and complex pumping tasks that cannot be handled by…
Read More »
Read More »
For closure welds, tight bends, T piece joints and dome end connections, a range of low cost, single ended weld purging dams are available from Huntingdon Fusion Techniques HFT.
Manufactured from low vapour pressure materials, weld purging dams are used when a conventional tandem weld purging system cannot be used.
Ron Sewell, chairman at Huntingdon Fusion Techniques HFT,said: “Even today,…
Read More »
Read More »
A British manufacturer is urging the water industry to consider alternative actuator technologies.
After securing high-value, water industry contracts for customers including Thames Water, specialist hydraulic manufacturer Advanced Actuators is targeting the global water industry with established technology, which challenges conventional hydraulics and the use of electric actuators.
With more…
Read More »
Read More »
A natural gas plant in the Middle East had a multi-stage, heavy duty vertical turbine pump in lean amine production that was continuously failing.
Lean amine is an organic compound that can absorb hydrogen sulfide and carbon dioxide from sour natural gas.
The temperature of the (VS1), type 60-WUJ-2M, pump service ranged from 6C to 59C.
The pump OEM had European antimony-impregnated hard…
Read More »
Read More »
The Atrato and MetraFlow ultrasonic flowmeters from Titan Enterprises have been designed to enable manufacturers to streamline production and reduce costs.
These devices measure the rate of flow of fluids with extraordinary levels of accuracy, helping drug manufacturers control small details that make a big difference during production.
This production can often present difficult challenges…
Read More »
Read More »
Huntingdon Fusion Techniques HFT has created the PurgEye 1000 Weld Purge Monitor enabling operators to read weld purge gas level from a distance.
The exposure to oxygen during the welding process on alloys such as stainless steel will result in discolouration and can severely reduce corrosion resistance properties.
It is crucial that the oxygen level is monitored throughout the welding process…
Read More »
Read More »
Filter manufacturer Amazon Filters has launched a new high-performance product range to support critical filtration processes in the oil and gas industries.
SupaSep LGP is the latest evolution of the UK company’s liquid-gas coalescers, used extensively in cost-effective upstream, midstream and downstream operations.
The new filters can be supplied complete in a bespoke housing or as direct…
Read More »
Read More »
The presence of moisture on the joint surface can create porosity in the weld metal.
It is important that the dew point is monitored so that welders are made aware when moisture is likely to be present.
Innovators in weld purging at Huntingdon Fusion Techniques HFT have recently developed a Dew Point Sensor, a predication instrument of when water will form on metal surfaces in welding…
Read More »
Read More »
Rotork has updated the PAX range of actuators by adding an AC power variant of the PAX1 linear actuator.
The wider PAX range is made up of a variety of linear actuators and motorised regulators. PAX1 units are flexible, low voltage actuators that are ideal for use in remote explosion proof locations.
They offer a thrust output of up to 2,890 N (650 lbf), enabling control of most regulators,…
Read More »
Read More »
CONNECT WITH US
Latest Video
Catalyst for Change: Sustainable and Efficient Flow Control for the Chemical Industry
#Farmers are benefitting from the extension in life being given to their @Landia #slurry #pumps, thanks to the specialist refurbishment services of @Powerline Electric Motors.
https://fluidhandlingmag.com/news/slurry-pump-transformers/
#fluidhandling #technology #success #pumps #valves #work #refurbishment
#Pipeline #leak #detection visionary @PipeSense has expanded its capabilities to support offshore operations following a successful project off the coast of #Angola.
https://fluidhandlingmag.com/news/pipesense-celebrates-inaugural-offshore-technology-deployment/
#fluidhandling #pipelines #technology #success