Features
Warning: Attempt to read property "ID" on false in /var/www/vhosts/fluidhandlingmag.com/public_html/wp-content/themes/woodcote-magazines/page-news_feed.php on line 69
A new research study from Flow Research, Flowmeters in the Oil and Gas Industry, found that worldwide revenues for all flowmeters sold to the oil and gas industry in 2019 amounted to $1.64 billion (€1.446 billion) and forecasts a solid compound annual growth rate (CAGR) of 2.6% over the next five years, for a total annual revenue exceeding $1.860 billion (€1.639 billion) in 2024.
The oil…
Read More »
Read More »
Online, one can find no end of advice on mixing systems for biogas digesters; often going into great detail about impeller designs, speeds and angles – but away from the office desk, speak to a plant manager or AD operator, and they’ll soon tell you that even the best mixing system in the world isn’t something that they want – inside the tank.
Yet around 15 years ago when the UK was…
Read More »
Read More »
Addressing the fast-rising cost of energy is rightly high on today’s agenda, so when four hefty 40HP rotors serving one’s aeration plant are also sitting at the top of your maintenance budget, finding a better means of mixing certainly concentrates the mind.
In Huntsville, Arkansas, the route to achieving optimum mixing of its oxidation ditches has been a marathon, not a sprint; but this…
Read More »
Read More »
As water utilities are looking for ways to do more with less, some manufacturers are investing in research and development to improve the product by using new materials to extend product life and value.
A simple choice of material can impact the design life, function and performance. One change that has all three beneficial outcomes for water distribution is moving from Nitrile (Buna-N) to…
Read More »
Read More »
Veolia Water Technologies has built an ultra-modern plant to produce drinking water in Ostend, Belgium.
In a multi-stage filtration process, the local water supplier is now producing drinking water of good quality – far above the statutory requirements.
At critical points of the process – during reverse osmosis, filtration with activated carbon and remineralisation of the water –…
Read More »
Read More »
Crane ChemPharma & Energy is one of the leading global manufacturer of valves, pumps and related flow control, instrumentation and automation accessories that offers a comprehensive range of highly engineered products.
The extensive product portfolio is designed to meet the most demanding requirements of industries, from valves and lined pipe to actuators, hoses, fittings, and peristaltic and…
Read More »
Read More »
Despite the soaring prices brought on by an energy crisis that shows no signs of diminishing, ask pump and blower operators about the efficiency of their equipment, and the truth is that most don’t know – according to a leading monitoring technology provider.
The pumps, for example, might often be described as ‘working fine’ and ‘doing their job’, but is that, now more than ever, a…
Read More »
Read More »
For half a century residents and commerce across eight municipalities of the greater London area of south-western Ontario have received their potable water supply from the Lake Huron Water Treatment Plant (WTP), near Grand Bend, and over this period the community has been well served.
However, a few years ago, the Lake Huron Primary Water Supply System (LHPWSS) announced an Energy Audit and…
Read More »
Read More »
The European Commission has adopted the Circular Economy Action Plan (CEAP), which was initially introduced in March 2020. It is one of the main building blocks of the European Green Deal, Europe’s agenda for sustainable growth.
The transition to a circular economy is expected to support the efficient use of natural resources and create sustainable growth and jobs. It is considered a…
Read More »
Read More »
The demands for safety, efficiency and environmental responsibility from the oil, gas and energy industries have significantly impacted the selection of pneumatic valve actuator for quarter turn failsafe valves (ball, butterfly and plug) and dampers.
Actuator sixing depends on the various valve torque values, minimum supply pressure and actuator-valve safety margins/factors considered to cover…
Read More »
Read More »
When engineers from Prestwich-based cold water booster specialist Pressboost attended a failing unit at a large hospital, they determined it was coming to the end of life.
The set was over 25 years old and had developed a multitude of problems.
The pump accumulator vessel had failed, one of the pumps had stopped, the controls were faulty and required complete overhaul and the associated…
Read More »
Read More »
Suck it up, pressurise it and send it to the treatment plant.
In theory, this should be a straightforward job for pumps at a lift station. However, as we all know, the curse of so-called ‘flushable’ products in our sewer systems is also proving that some so-called ‘non-clogging pumps’ are getting clogged.
If you do not have a problematical lift station in your network, you are either…
Read More »
Read More »
There are two distinct functions that a valve actuator performs – the ‘intelligence’ of managing digital or analogue control signals and feedback loops, and the ‘brute force’ to open and close a variety of different valve types.
AUMA separates the ‘intelligence’ and ‘brute force’ by taking a modular approach to our actuator construction. This provides an enhanced choice of…
Read More »
Read More »
According to leading pump and mixer manufacturer, Landia, there is support for the call by a water company boss for organisations to engage with the public more to address unfair criticisms.
However, it believes that there are significant improvements that the industry could implement from within to change negative perceptions that people currently have of the water industry.
Regarding the…
Read More »
Read More »
Can you introduce yourself as well as explain to our readers what FTC does?
Houston-based Filtration Technology Corporation (FTC) has an impressive history of developing and delivering innovative filtration and separation products and solutions since 1987. FTC’s extensive line of proprietary and industry standard products covers liquid-solids filtration, liquid-liquid separation, …
Read More »
Read More »
Specifying non-standard technical requirements or non-commercially available materials can impact the economics and timeframe of any project.
When specifying a material for a specific oil and gas application, there are many different factors to consider. Here some practical examples illustrating how simple material parameters can add or reduce value and complexity are explored.
Simplifying…
Read More »
Read More »
A farm in the north-west of Kent has significantly enhanced its biogas operation by upgrading the mixing system for its two 4,500m3 anaerobic digesters.
Oncoland Farm (part of The Billings Group) had been experiencing problems with the mixers that were installed when the gas-to-grid AD plant was built in 2020 as part of its continuing diversification.
Traditionally, a mixed farm of arable,…
Read More »
Read More »
The energy world is at the dawn of a new industrial age – the age of clean energy technology manufacturing – that is creating major new markets and millions of jobs, but also raising new risks, prompting countries across the globe to devise industrial strategies to secure their place in the new global energy economy, according to a major new International Energy Agency (IEA) report.
Energy…
Read More »
Read More »








