Workdry International, the holding company of Selwood, has acquired parts of water treatment specialist Siltbuster Group. Hampshire based Selwood has a network of 21 pump rental branches around the UK. The Siltbuster businesses will remain based in Monmouth, Wales, with their 60 employees continuing to work across the UK. Chris Garrett, Selwood CEO, said: “This is... [Read More]

Prioritising versatility and durability, the company says that the pump has exceeded API 675 performance standards. 15 January, Wanner Engineering, Inc., Minneapolis, Minnesota, has announced the introduction of the Hydra-Cell Metering Solutions model MT8 triplex metering pump. The product aims to handle a variety of processing fluids at low flow rates and high pressures.... [Read More]

Hidrostal has made AxFlow a ‘key’ UK distributor for their range of screw centrifugal pumps for the industrial and process sectors. According to AxFlow, they are the UK’s largest distributor of process pumps, which they supplement with a network of service support facilities. Hidrostal believe that AxFlow’s process experience will open up opportunities... [Read More]

The pump is designed for maximum compatibility and accessibility. NETZSCH has expanded its line of full service-in-place (FSIP) industry-leading NEMO® progressive cavity pumps. The maintenance-friendly FSIP™ design has been re-engineered to provide access to all the pumps’ rotating parts. NEMO FSIP is available in six sizes (NM045 to NM105) for flow rates... [Read More]

The British Pump Manufacturers Association (BPMA) is looking to boost consumer confidence and streamline purchasing. The association is trying to highlight the initiative to increase awareness of the importance of choosing the right pump for a specific task and when to upgrade. Old pumps not only consume too much energy, they are also prone to failure which can adversely... [Read More]

Siemens will showcase its comprehensive oil and gas solutions for upstream, midstream and downstream applications in booth 1934 at the upcoming Turbomachinery & Pump Symposia in Houston, Texas. The company will also feature electrification, automation and digitalisation solutions that span the oil and gas value chain. During the symposium, Siemens will also unveil... [Read More]

Visitors to booth 1435 at Turbomachinery & Pump Symposia 2017 in Houston, Texas, will have the opportunity to experience Flowserve product demonstrations, meet the company’s pump and seal specialists, and attend education sessions led by Flowserve instructors. Sales specialists, product managers, application engineers and division managers who represent Flowserve’s... [Read More]

Sulzer will be showcasing its turnkey services and pumping solutions at booth 2023 at the Turbomachinery & Pump Symposia in Houston, Texas. Attendees will be able to meet with Sulzer representatives at the booth throughout the event. Sulzer’s 3D printing capabilities will be on show, a manufacturing method the business utilises to create high performance components... [Read More]

Faxe, famous for its beer, is being fitted with the new mixers after its wastewater treatment plant’s ‘racetrack’ design became inviable. The new flowmakers’ slow speeds are designed to avoid disturbing the required biological balance. Their light touch also contributes to their low energy consumption, according to a press release from Landia. The... [Read More]

Few will have failed to notice the increasing number of headlines relating to ‘fatbergs’, enormous congealed lumps of waste matter that are clogging sewers in major cities around the world. Tackling the problem at source requires a programme of education in what can and cannot be placed in the wastewater system. For now, however, the focus is on how best to... [Read More]

Based near Wells in Somerset, St Cuthberts Mill specialises in the manufacture of high-quality artists’ papers. With a heritage that can be traced back to the 1700s, the company makes approximately 80 tonnes of paper every month using a continental shift pattern across 24/7 operations. The secret of the company’s success lies in the performance of its papers,... [Read More]

Pump solutions specialist Selwood has launched what it dubs a ‘green-friendly' electric solids handling pump. The UK based company has introduced a new Super Silent electric drive addition to its renowned S range of solids handling pumps, called the S150 Super Silent 30kW Electric. Designed to be environmentally friendly, the pump is ideal for a range of water... [Read More]

Grundfos, a specialist in the manufacturer of energy-efficient pumps in the world, has announced that its subsidiary Grundfos Pumps India Pvt (Grundfos India) will be launching a new manufacturing facility in Dantali, Gujarat. The facility is spread across two acres and will supply stainless steel products, boosters, and box products to India’s... [Read More]

US liquid management solutions provider BakerCorp has recently marked the completion of a multi-site dewatering project for a Denver area public-private construction entity. BakerCorp was chosen as the single vendor for the project based on the company’s ability to design a custom filtration, containment, and pumping solution for around-the-clock groundwater containment... [Read More]

Pump specialist Maag has opened two new facilities in Shanghai and Guangzhou to serve the Chinese market. The first is a new 4000 m2 facility in the Jiading district of Shanghai.The new facility will include production for Maag’s pumps and pelletizers as well as offices for its sales, service and aftersales support. It will help Maag to better showcase its portfolio... [Read More]

In Sweden, water technology company Xylem has won the 2017 ‘Comfort Supplier of the Year Award’. “Xylem’s expansive footprint throughout Sweden and ability to provide efficient customer service right across the country was highlighted by our member companies as very positive,” said Göran Swedérus, CEO Comfort-Kedjan. “The... [Read More]