Proco Products introduces new check valve
Proco Products has announced the new ProFlex™ Rubber Check Valve product into its portfolio.
The ProFlex™ Series 730CBD Coarse Bubble Diffusers is a pollution control technology device used to aerate or mix wastewater for effluent/sewage treatment.
A coarse bubble diffuser is used to ensure that sewage and Hi specific gravity content is properly “agitated”, or diffused to ensure proper mixing.
Diffusion is a term used to guarantee that when sewage is putinto a holding tank, it is not allowed to settle into the bottom of a tank.
The ProFlex™ 730 CBD is an engineered moulded valve which, when submerged and charged with air, will create a series of bubbles strong enough to capture the sewage effluent and carry it to the surface of the tank.
The valve, with its unique elastomeric duck bill design, is always in a 100% closed position and relies on static head to open.
Thus, the instant there is an absence of inlet pressure, the valve is closed bubble tight ensuring unwanted media does not flow back into the manifold.
The ProFlex™ 730CBD also features a “Hex” ¾ NPT SS nipple instead of a standard SS pipe nipple.
This feature allows the owner/contractor a hassle-free install experience, ensuring a positive seal on the manifold without worry of breaking the adapter or the manifold’s inlet fitting.
EPDM or Neoprene is the most specified elastomer, and both offer flexibility along with long-life designed elastomers.
The ProFlex™ Series 730CBD Coarse Bubble Diffusers is a pollution control technology device used to aerate or mix wastewater for effluent/sewage treatment.
A coarse bubble diffuser is used to ensure that sewage and Hi specific gravity content is properly “agitated”, or diffused to ensure proper mixing.
Diffusion is a term used to guarantee that when sewage is putinto a holding tank, it is not allowed to settle into the bottom of a tank.
The ProFlex™ 730 CBD is an engineered moulded valve which, when submerged and charged with air, will create a series of bubbles strong enough to capture the sewage effluent and carry it to the surface of the tank.
The valve, with its unique elastomeric duck bill design, is always in a 100% closed position and relies on static head to open.
Thus, the instant there is an absence of inlet pressure, the valve is closed bubble tight ensuring unwanted media does not flow back into the manifold.
The ProFlex™ 730CBD also features a “Hex” ¾ NPT SS nipple instead of a standard SS pipe nipple.
This feature allows the owner/contractor a hassle-free install experience, ensuring a positive seal on the manifold without worry of breaking the adapter or the manifold’s inlet fitting.
EPDM or Neoprene is the most specified elastomer, and both offer flexibility along with long-life designed elastomers.
