Fluenta flare gas meter accuracy proved by the Netherlands’ National Metrology Institute

VSL, the National Metrology Institute in the Netherlands, has proved flare gas flowmeters from Fluenta can operate with an uncertainty of 1.5% even at low flow rates. 

Extensive testing at the VSL facility in the Netherlands demonstrated that calibration of the Fluenta 160 flare gas meter can double its accuracy, from 3 to 1.5% uncertainty.

Fluenta’s gas flowmeters use ultrasonic technology to deliver the most accurate measurement of flow against all temperatures and flow rates. 

The VSL calibration testing follows a successful testing at the CEESI facility in Colorado, which proved the Fluenta 160 flare gas meter has an uncertainty of less than 3%, even at low flow velocity without calibration.

During the VSL testing, the Fluenta 160 gas meter was calibrated using air under atmospheric conditions, with a relative humidity of 44.8% and a temperature of 20°C.

The 160 meter was calibrated against a VSL multipath master meter for reference, where the volume of flow of the reference meter was converted to a volume flow at the conditions of the 160, taking temperature and pressure into account.

VSL offers the lowest possible uncertainty in the field of volume, mass, and flow and its process analyses the entire metering system to establish its accuracy and measurement uncertainty. 

Sigurd Aase, CEO of Fluenta, said: “Testing of Fluenta’s 160 flare gas meter at the VSL facility was carried out on behalf of a customer that required the highest level of accuracy for its flowmeters to achieve its corporate objective of zero routine flaring by 2030. Introduced by the World Bank, this initiative aims to eliminate routine gas flaring no later than 2030.” 

“The additional accuracy provided by calibrated flowmeters enables companies to more effectively manage the transition to zero routine flaring, as well as report non-routine flaring volumes accurately,” Aase continued.