Atlas Copco expands the WEDA range with the S50 Sludge pump
Atlas Copco has developed a new addition to the WEDA submersible dewatering pump range with the WEDA S50.
Fitting into the S family of WEDA sludge pumps, the new model complements the other pumps in the range in terms of specifications.
The WEDA S range is designed for thick, soft, wet mud or other similar mixtures.
These pumps are ideally suited for construction dewatering, industrial or refining applications. The technical specifications of the new S50 model place it between the S30 and the S60 pumps.
It offers a maximum flow of 1450 l/min while pumping sludge with a specific gravity of up to 1400 kg/m3. The S50 has a rated output of 4.8 kW and a maximum solids handling size of 50 mm, which is the same as both the S30 and S60 models.
“The WEDA S50 is an ideal pump for rental companies and general contractors where they don’t have to worry about what goes in the pump,” said Hrishikesh Kulkarni, Product Manager of Atlas Copco Power and Flow division.
“Accordingly, these vortex designed pumps are ideal for abrasive media and handling solids up to 50 mm. The S50 fits neatly into the existing range of sludge pumps, making our S family portfolio complete with a range from 0.5-1-3-5 and 7.5 KW.”
The Sludge portfolio covers a wide range of applications such as cement plants, industrial process water, sedimentation tanks, treatment plants and construction sites.
The WEDA S50 comes with the standard WEDA+ features, including rotation control, phase failure protection, thermal switches in each motor winding, and 16 Amps phase shifter plugs. All WEDA+ pumps are fitted with a 20 m cable and the reinforced cable entries ensure high resistance to water leakage.
S50 pumps are built with hardened high-chrome impellers and volute which provides high wear resistance. For extra protection, the casing rib design offers external cooling to the motor in case of dry running which gives the S50 exceptional dry running capabilities.
Fitting into the S family of WEDA sludge pumps, the new model complements the other pumps in the range in terms of specifications.
The WEDA S range is designed for thick, soft, wet mud or other similar mixtures.
These pumps are ideally suited for construction dewatering, industrial or refining applications. The technical specifications of the new S50 model place it between the S30 and the S60 pumps.
It offers a maximum flow of 1450 l/min while pumping sludge with a specific gravity of up to 1400 kg/m3. The S50 has a rated output of 4.8 kW and a maximum solids handling size of 50 mm, which is the same as both the S30 and S60 models.
“The WEDA S50 is an ideal pump for rental companies and general contractors where they don’t have to worry about what goes in the pump,” said Hrishikesh Kulkarni, Product Manager of Atlas Copco Power and Flow division.
“Accordingly, these vortex designed pumps are ideal for abrasive media and handling solids up to 50 mm. The S50 fits neatly into the existing range of sludge pumps, making our S family portfolio complete with a range from 0.5-1-3-5 and 7.5 KW.”
The Sludge portfolio covers a wide range of applications such as cement plants, industrial process water, sedimentation tanks, treatment plants and construction sites.
The WEDA S50 comes with the standard WEDA+ features, including rotation control, phase failure protection, thermal switches in each motor winding, and 16 Amps phase shifter plugs. All WEDA+ pumps are fitted with a 20 m cable and the reinforced cable entries ensure high resistance to water leakage.
S50 pumps are built with hardened high-chrome impellers and volute which provides high wear resistance. For extra protection, the casing rib design offers external cooling to the motor in case of dry running which gives the S50 exceptional dry running capabilities.
