May 11, 2018

Wanner Engineering announces new materials for Hydra-Cell T100 high pressure pumps

(via Wanner Engineering)
(via Wanner Engineering)

Wanner Engineering has announced the introduction of its new Hydra-Cell T100 Series high pressure pumps, featuring corrosion-resistant 316L stainless steel pump heads and an expanded choice of diaphragm materials, valve materials, and actuating oils. With flow rates up to 26 gpm (98 l/min; 891 BPD) and discharge pressures to 5000 psi (345 bar) the T100 is designed for a variety of applications. These include salt water disposal (SWD), salt water injection, bulk transfer and hydraulic lift in oil fields, as well as steam generation, reverse osmosis in water and wastewater treatment, and mine dewatering.

Hydra-Cell T100 Series triplex pumps are ‘packing-free’ and designed to replace horizontal centrifugal pumps and packed plunger pumps in oil and gas applications. Featuring a seal-less, multiple-diaphragm design, the company says the T100 eliminates hazardous VOC emissions along with the clean-up and disposal costs of packed-pump leakage. The design is also meant to eliminate the need for external lubrication or maintenance as well as plunger wear problems associated with packing.

Wanner claims that T100 Series pumps can run dry without damage, operate with a closed or blocked suction line, and pump hot abrasive fluids effectively. The pump employs hydraulically-balanced diaphragms that enable the pump to handle high pressures with low stress and provide linear, ‘virtually pulse-free’ flow.

Other new customer-specified materials of construction for the T100 include Aflas and EPDM diaphragms, tungsten carbide valve seats and valve discs sets, Hastelloy C and Nitronic 50 valve materials, plus valve spring retainers in 17-4 Stainless Steel, PVDF, 316 SST, and Hastelloy C. New available actuating oils include 40-weight, EPDM-compatible oil, food-contact oil, and 15W50 high-temperature, severe-duty synthetic oil.

(via Wanner Engineering)






May 25, 2018
The Estigia type series extends the KSB portfolio for the chemical and petrochemical industries and other applications, and will be showcased at this year’s ACHEMA trade fair in Frankfurt. The pumps... [Read More]

May 24, 2018
The UK’s Environment Agency has urged government to take action to increase the water supply and urged consumers to use less water in the face of shortages caused by climate change and demand from... [Read More]

May 24, 2018
ExxonMobil is introducing greenhouse gas reduction measures designed to improve emissions performance by 2020. Targets include a 15% decrease in methane emissions and a 25% reduction in flaring compared... [Read More]

May 24, 2018
TUV SUD NEL, a specialist in flow measurement research and development, has completed the base building that will house its £16 million (€18 million) Advanced Multiphase Facility (AMF). Construction... [Read More]

May 23, 2018
Cheniere Energy’s has committed to the development of a third LNG liquefaction train at its Corpus Christi liquefaction project (CCL project). It was announced on 22 May that... [Read More]

May 23, 2018
Hydranautics has announced the launch of the CPA7 series of RO membranes for municipal and industrial fluid treatment: the CPA7-LD-4040, CPA7-LD and CPA7 MAX. The CPA7 membranes offer a combination of... [Read More]

May 22, 2018
KSB Pumps and Valves has assisted the University of Pretoria in the construction of a large controlled-temperature test unit, which will form the backbone of ongoing research into heat transfer, fluid... [Read More]

May 22, 2018
The new MetraFlow ultrasonic flowmeter from Titan Enterprises incorporates a chemically resistant Perfluoralkoxy Alkane (PFA) tube onto which are mounted high sensitivity ultrasonic sensors. The company... [Read More]

May 22, 2018
ECD says the analyser-process controller simplifies liquid measurement and control The new LQ800 Multi Channel Controller from Electro-Chemical Devices (ECD) combines internet-of-things liquid analytical... [Read More]

May 21, 2018
The need to repair the ageing water infrastructure sitting in cities like Los Angeles is becoming more and more acute. Utilities are increasingly concerned about the lifespan of their systems and how quickly... [Read More]

May 21, 2018
The company says the acquisition complements and strengthens its global presence in delivering fluid automation solutions. Emerson announced on 17 May that it has agreed on terms to acquire Aventics... [Read More]

May 21, 2018
Orbinox has launched a new line of heavy duty slurry knife gate valves designed for high pressure applications. The HG series knife gate valve has been specifically designed to offer excellent performance... [Read More]

May 18, 2018
Tendeka has successfully tested its PulseEight wireless control and monitoring device with an operator in the North Sea. The PulseEight uses pressure pulse telemetry to communicate wirelessly between downhole... [Read More]

May 18, 2018
The Dhaka Water Supply and Sewerage Authority (WASA) has chosen Veolia and Suez to design, build and operate the Gandharbpur drinking water treatment plant. WASA is the body in charge of drinking water... [Read More]

May 17, 2018
ITT announced 17 May that it is expanding its i-ALERT Monitoring Solution portfolio, giving customers additional options to maximise the efficiency and total cost of ownership of all types of rotating... [Read More]