logo
menu

Endress+Hauser introduces high performance pressure transducers for varying temperatures and pressures

Endress+Hauser Cerabar pressure transducers handle temperatures from sub-zero to boiling
Endress+Hauser Cerabar pressure transducers handle temperatures from sub-zero to boiling

Endress+Hauser has introduced Cerabar PMP11, 21, and 23 pressure transducers that measure up to 6,000psi and are factory spanable to specific application requirements.

The transducers are available with threaded or welded hygienic process connections, meet a variety of industry standards including FDA, FM, IEC, and Ex, and provide 4-20mA or 0-10Vdc output signals.

The Cerabar PMP11 and PMP21 transducers measure pressures from -15 to 6,000psi at temperatures from -40 to 100°C with accuracy of 0.5% and 0.3%, respectively.

The Cerabar PMP23 model measures pressures from -15 to 600psi at temperatures from -10 to 100°C with accuracy of 0.3%.

The IP69 housing and process isolating diaphragm are 316L stainless steel, and fully welded hygienic process connections without additional adapters or O-rings are available for washdown applications.

The PMP23 can be used in clean-in-place (CIP) and service-in-place (SIP) applications at temperatures up to 135°C for a maximum of one hour.

Transducer models with a valve plug can be fitted with the PHX20 local display with a one-line LCD display showing measured values, fault messages and information messages.

The device display can be turned in 90° steps, making it easy to reorient as required for improved readability.

Approvals include CE, ATEX, FM, FDA, CSA, GOST, IEC Ex, NEPSI Ex, TIIS, RCM-Tick Marking (Australia) and others.

The transducers correspond to Article 3 (3) of the EC directive 97/23/EC (Pressure Equipment Directive), and have been designed and manufactured in accordance with Category I or II, SEP.

Endress+Hauser Cerabar pressure transducers handle temperatures from sub-zero to boiling