logo
menu
← Return to the newsfeed...

Endress+Hauser launches new electromagnetic flowmeter

With the introduction of a new high pressure electromagnetic flowmeter, Endress+Hauser now offers a complete portfolio of instrumentation for the oil & gas industry. Approved for use in hazardous areas, the Promag 53 is designed for demanding environmental and process conditions.

The material specification and construction of the Promag 53 have been chosen to withstand the rigours of the oil & gas industry and to meet its demanding safety standards. The sensor design, materials and non-destructive test procedure conform to EN13480 and ASME B31.3 for the highest possible plant safety. As well as having all the relevant certification, the Promag 53 is compact and fully welded to ensure it is robust enough to ensure the toughest conditions and is accurate to 0.2% of reading.

The materials used for the variety of process connections as well as the measuring tube are typically UNS31254 (6Mo), guarding against sulphide cracking. ASME Cl.600 to Cl.2500 process connections can be used up to 400 bar system pressure. The device also comes with a range of hazardous area approvals including ATEX II 2G and ATEX II 2D. FM and CSA approvals are also available.

Typical applications:

Water injection (or produced water re-injection) for enhanced oil recovery (EOR) to increase reservoir pressure.
Produced water injection into disposal wells: measurement of the amount of the disposed water/ water discharge.
Potash mining: injection of heated brine (salt & water solution at up to 100°C) to retract potash from the underground ore.





148 queries in 0.293 seconds.